ENGINE AR-COMPLETE 2569248 - Caterpillar

Illustration 1 g02377717
If equipped with a rear PTO shaft, remove retaining ring (1), bearing assembly (3), and output shaft (4). Remove retaining ring (2) in order to remove bearing assembly (3) from output shaft (4) .
Illustration 2 g02454019
Remove bracket (5) .
Illustration 3 g02377316
Install Tooling (A) onto the transmission housing.
Illustration 4 g02454139
Illustration 5 g02453439
Illustration 6 g02454022
Use Tooling (B), Tooling (C), and a suitable lifting device in order to install transmission and torque converter (6) onto Tooling (D). The weight of transmission and torque converter (6) is approximately 590 kg (1300 lb).Note: Three 1/2-20 bolts and one 3/8-24 bolt are used to mount the transmission to Tooling (D) .
Illustration 7 g02394559
Remove bolts (7), cover (8), and O-ring seal (9) .
Illustration 8 g02394578
Remove magnetic filter (10) and screen (11) .
Illustration 9 g02454149
Remove bolts (12) and bolts (13) .
Illustration 10 g02454152
Remove bolts (14) and oil pan (15) .
Illustration 11 g02454156
Remove seal (16), O-ring seal (17), and O-ring seals (18) .
Illustration 12 g02394588
Remove tube assembly (19) and tube assembly (20). Remove bolts (21) and housing (22) .
Illustration 13 g02394590
Remove O-ring seal (23) .
Illustration 14 g02394520
Remove bolts (24) in order to remove gear pump (25) .