2602740 ENGINE AR-COMPLETE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA2602740
260-2740
2602740
CA2602740
260-2740
2602740
TRUCK ENGINE,
Compatible equipment models: 2602740:
For full view, you need register
Information:
"Availability"
This section provides availability and lost values for 1 min, 10 min, and 60 min time frames that the health interface module was receiving corrections.1 min - This section indicates the percentage of time within the previous minute that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous minute. If the value is "0", then no corrections were received over the previous minute.10 min - This section indicates the percentage of time within the previous 10 minutes that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous 10 minutes. If the value is "0", then no corrections were received over the previous 10 minutes.60 min - This section indicates the percentage of time within the previous 60 minutes that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous 60 minutes. If the value is "0", then no corrections were received over the previous 60 minutes."Data Link Statistics"
Illustration 3 g03229362
"Data Link Statistics" pageThe "Data Link Statistics" page is provided to view data link information of the satellite receiver."Rx Count" - This value is the number of messages received from the satellite receiver since the last reset."Tx Count" - This value is the number of messages sent to the satellite receiver since the last reset."Rx Error Count" - This value is the number of invalid messages that were received from the satellite receiver."Tx Error Count" - This value is the number of messages that could not be sent to the satellite receiver.Note: The values are displayed in real time. The web page is refreshed automatically.Note: The "Clear" button is provided to reset all values back to zero."Position Information"
Illustration 4 g03229376
"Position Information" pageThe "Position Information" page displays GPS status and position information. The following information is displayed:"Connected" - This value is either "Yes" or "No"."GPS Source" - This value provides information about the source of the position information. The following data may display:
"No Source"
"Initialization in Progress"
"Low Precision SK8 GPS Receiver"
"Low Precision MS3xx GPS Receiver"
"High Precision GPS Receiver""DGPS Mode" - This data indicates the mode of the satellite receiver. The following modes are possible:
"No message from GPS receiver"
"Invalid GPS messages detected"
"No fix available"
"2D fixes, no corrections"
"2D fixes, with corrections"
"3D fixes, no corrections"
"3D fixes, with corrections""Easting" - This data is the easting value that is reported by the satellite receiver in local coordinates.
This section provides availability and lost values for 1 min, 10 min, and 60 min time frames that the health interface module was receiving corrections.1 min - This section indicates the percentage of time within the previous minute that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous minute. If the value is "0", then no corrections were received over the previous minute.10 min - This section indicates the percentage of time within the previous 10 minutes that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous 10 minutes. If the value is "0", then no corrections were received over the previous 10 minutes.60 min - This section indicates the percentage of time within the previous 60 minutes that the health interface module was receiving corrections and percentage of lost corrections. If the value is "100%", then corrections have been received for the previous 60 minutes. If the value is "0", then no corrections were received over the previous 60 minutes."Data Link Statistics"
Illustration 3 g03229362
"Data Link Statistics" pageThe "Data Link Statistics" page is provided to view data link information of the satellite receiver."Rx Count" - This value is the number of messages received from the satellite receiver since the last reset."Tx Count" - This value is the number of messages sent to the satellite receiver since the last reset."Rx Error Count" - This value is the number of invalid messages that were received from the satellite receiver."Tx Error Count" - This value is the number of messages that could not be sent to the satellite receiver.Note: The values are displayed in real time. The web page is refreshed automatically.Note: The "Clear" button is provided to reset all values back to zero."Position Information"
Illustration 4 g03229376
"Position Information" pageThe "Position Information" page displays GPS status and position information. The following information is displayed:"Connected" - This value is either "Yes" or "No"."GPS Source" - This value provides information about the source of the position information. The following data may display:
"No Source"
"Initialization in Progress"
"Low Precision SK8 GPS Receiver"
"Low Precision MS3xx GPS Receiver"
"High Precision GPS Receiver""DGPS Mode" - This data indicates the mode of the satellite receiver. The following modes are possible:
"No message from GPS receiver"
"Invalid GPS messages detected"
"No fix available"
"2D fixes, no corrections"
"2D fixes, with corrections"
"3D fixes, no corrections"
"3D fixes, with corrections""Easting" - This data is the easting value that is reported by the satellite receiver in local coordinates.