ENGINE AR 2614294 - Caterpillar

2614294 ENGINE AR Caterpillar parts D6R III

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2614294
261-4294
2614294

Weight: 2350 pounds 1065 kg.

Buy ENGINE AR 2614294 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

2614294 SHORT BLOCK 10R9062 R

2614294 LONG BLOCK 10R9965 R

2614294 LONG BLOCK M 20R5471 R

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

TheKitchenette 2614294 Set of 4 Deep Plates in Stoneware, Grey, Red, 21 x 17 x 3 cm

$34.28

10 Oct 2019
3.30693393[1.35] pounds
-: -

TheKitchenette 2614294 Set of 4 Deep Plates in Stoneware, Grey, Red, 21 x 17 x 3 cm
The melted colours enhance this vintage look tableware set of four plates. || This stoneware dish is made on an irregular shape with a material effect. || Its cracked-look glacure combines strength and durability for everyday use || This set of 4 plates is easy to clean as you can put them in the dishwasher. || You can also put these vintage style plates in your microwave oven.

This part in 1 request: Show. This information for suppliers only!

#3830 261-4294

2016-03-25

For full view, you need register

Compatible equipment models: 2614294:

TRACK-TYPE TRACTOR D6R III Caterpillar

Information:

Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the expansion tank into a suitable container for storage or for disposal.
Illustration 1 g00599053
Remove bolts (2) and the washers. Carefully slide flange (1) down tube (3).
Illustration 2 g00599054
Remove bolts (4), elbow (5), and tube (3).
Illustration 3 g01055978
Remove bolts and washers (6). Remove flanges (8) and tubes (7).
Illustration 4 g00599056
Remove bolts (9) from the top of the expansion tank. Install Tooling (A) in the holes.
Attach a suitable lifting device onto Tooling (A). The weight of the expansion tank is approximately 209 kg (460 lb).
Illustration 5 g01056904
Remove bolts (10) and the washers. Remove expansion tank (11). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 6 g00599056
Remove bolts (9) from the top of the expansion tank. Install Tooling (A) in the holes.
Attach a suitable lifting device onto Tooling (A). The weight of the expansion tank is approximately 209 kg (460 lb).
Illustration 7 g01056904
Position expansion tank (11) and install bolts (10) and the washers .
Illustration 8 g00599056
Remove Tooling (A). Install bolts (9) in the holes.
Illustration 9 g01055978
Inspect the seals for flanges (8). Obtain new seals, if necessary. Lubricate the bores of flanges (8) lightly with glycerin. Insert the seals into flanges (8). Install flanges (8) and tubes (7) with bolts (6).
Illustration 10 g00599054
Inspect the O-ring seal for tube (3). Obtain a new O-ring seal, if necessary. Lubricate the bore of elbow (5) lightly with glycerin. Insert the O-ring seal into the bore of elbow (5). Insert tube (3) into the bore of elbow (5).
Inspect the seal for the joint between elbow (5) and the water pump. Obtain a new seal, if necessary. Place the seal onto the flange of elbow (5). Fasten elbow (5) to the water pump with bolts (4).
Illustration 11 g00599053
Inspect the gasket for the joint between flange (1) and the expansion tank. Obtain a new gasket, if necessary. Insert the gasket into flange (1). Carefully slide flange (1) up tube (3). Fasten flange (1) with bolts (2) and the washers.
Fill the expansion tank to the correct level. For the proper coolant to use, refer to the Operation and Maintenance Manual for the engine that is being serviced.