ENGINE AR 2640206 - Caterpillar

Never transport the machine with the engine running. If the fine swing control is left ON with the engine running, the swing parking brake will stay disengaged.
Comply with any laws that govern the characteristics of a load (length, width, height, and weight).
Illustration 1 g00543871
Move the hydraulic activation control lever to the LOCKED position.
Turn the engine start switch to the OFF position in order to stop the engine. Remove the engine start switch key.
Turn the battery disconnect switch to the OFF position and remove the disconnect switch key.
Lock the door and the access covers. Attach any vandalism protection.
Illustration 2 g00102439
Chock the tracks and secure the machine with tie-downs. Make sure that you use the proper rated wire cable. Use the front towing eyes on the lower frame, the rear towing eyes on the lower frame, and the rear towing eye that is on the upper frame.Install tie-downs on the swing boom in order to prevent the boom from shifting.Securely fasten all loose parts and all removed parts to the trailer or to the rail car.When the engine is stopped, the swing parking brake is automatically applied. This prevents the upper structure from swinging.
In freezing weather, protect the cooling system with antifreeze, to the lowest outside expected temperature on the travel route. Or, drain the cooling system completely.