ENGINE AR 2640207 - Caterpillar

Illustration 1 g00691436
(1) Flywheel (2) Flywheel bolts Tighten the flywheel bolts to the following torque. ... 73 N m (54 lb ft) (3) Ring gear The maximum temperature for heating the flywheel ring gear for installation ... 150°C (302°F)Note: When the backplate is installed, place a bead of 8T-9022 Silicone Gasket around the bolt holes for the backplate in the cylinder block.Flywheel Runout
Face Runout
Illustration 2 g00295955
Measure the Face Runout.Maximum permissible face runout of the flywheel ... 0.20 mm (0.008 inch)Refer to Testing and Adjusting, "Flywheel - Inspect".Outside Diameter Runout
Illustration 3 g00295956
Measure the Outside Diameter Runout.Maximum permissible outside diameter runout of the flywheel ... 0.20 mm (0.008 inch)Refer to Testing and Adjusting, "Flywheel - Inspect".