ENGINE AR-COMPLETE 2640877 - Caterpillar

Machine Positions (AMP) Messages - AMP is a method for sending messages between the on-board and the office software.Alternative Configuration File (ACF) - The ACF is a configuration for the machine that is saved every 30 minutes for use when the configuration cannot be written due to an improper shutdown.Autonomous - Autonomous is a type of GNSS solution (accuracy) that indicates the lowest precision available. This solution occurs when correction information from the reference station is not available due to faulty reference station receiver or radio network. The accuracy is 10 - 15 m.Autonomous Haul System - A special use of the on-board software is with Command office software for autonomous haul systems. Command settings allow the machine operator to see lanes, set spot locations for loading, and call and send trucksAvoidance Strategy - Avoidance Strategy is a way for the on-board software to report its position to the office when the office is using METS office software. The strategy also works in Cat MineStar System and Terrain applications where the *.cat files are used. The on-board software warns the operator when their machine enters a restricted zone. Background Color - The color representing the accuracy of the GNSS position can be green (best), yellow, magenta, red, gray, or orange.Base (station) - The base station is a GNSS reference station that broadcasts additional satellite and position information to the machine systems for calculating accurate dynamic positions. The terms base and reference station are used synonymously.CAESultra - The Computer Aided Earthmoving System (CAESultra) is part of the Mining and Earthmoving Technology Systems. CAESultra provides machine operators and site managers with various continuously updated information regarding the execution of earthmoving tasks.Cat MineStar System - This program combines Fleet, Terrain, Detect, Health, and Command into a single product offering. *.cat files - These files are used by the on-board software to show or display information to the operator. There are several types of *.cat files including the following:
DE or ED - Elevation Design
UE or CE - Current Elevation
OG - Original Ground
UC - Update CompactionCaterpillar Electronic Technician (Cat ET) - Cat ET is the Caterpillar PC program that is used by dealers to support Caterpillar products.Command - A special use of the on-board software is with Command office software for autonomous haul systems. Command settings allow the machine operator to see lanes, set spot locations for loading, and call and send trucks.Component Identifier (CID) - This term is used by diagnostics to indicate which component is suspected to be faulty.Compact File Portion (CFP) - A CFP is a compressed message that is being sent to the Machine or received from the machine.COMMS - This is the abbreviation for communications.Detect Strategy (Cat Detect) - This strategy allows mines to equip machines with practical, site-specific systems that can both enhance operator awareness of the working environment and provide mine administrators with effective mobile equipment control in the interest of safety. In surface mining applications, Detect offers three levels of operator and administrator awareness: Vision,