ENGINE AR-COMPLETE 2645662 - Caterpillar

Brightness button - The brightness button is used to adjust the screen brightness. The screen will toggle between two settings. Press once to set the screen to the brightest mode, press again to set the screen to dimmest mode.
Illustration 1 g03057509
Brightness adjustment mode (5) Dim button (6) Brighten buttonTwo brightness modes may be set. A day mode and a night mode are configured by the operator.Press and hold the brightness button for 3 seconds. The screen brightness adjustment window will display to set the two modes. Move the slider button towards the dimmer button to change the level of the minimum brightness and then release the slider button. This action will set the night mode level. Then move the slider button towards the brighter button to change the level of the maximum brightness and then release the slider button. This action will set the day mode level. Once the two modes are set, switching between the modes is possible by pressing the brightness button once.Note: At night, adjust the brightness of the display to a level that allows viewing comfort while not distracting from night time operation.Configuration Keys
Table 1
List of Configuration Keys    
Configuration Key    Description    
Day Mode Brightness Level     This key specifies the day mode brightness level on the screen.    
Night Mode Brightness Level     This key specifies the night mode brightness level on the screen.    Refer to Table 1 for information about the configuration keys that are applicable for the login procedure. For further information, refer to Systems Operation, UENR3246, "Configuration Keys".