2645696 ENGINE AR-COMPLETE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA2645696
264-5696
2645696
CA2645696
264-5696
2645696
TRUCK ENGINE,
Compatible equipment models: 2645696:
For full view, you need register
Information:
Logging In
Change operator button To log into the system, perform the following procedure:
Press the change operator button on the touchscreen for the display.One of the following windows will appear:
"Login Confirmation"
"Select User Id"
Illustration 1 g01749613
"Login Confirmation" window
Illustration 2 g01749614
"Select User Id" window
If the "Login Confirmation" window appears, confirm the login. Refer to Illustration 1. If the "Select User Id" window appears, enter a new user ID. Refer to Illustration 2. Choose an entry for a user ID from one of the following selections:
Selection tree
Selection menu
Keypad
Press the "OK" key on the touchscreen or press "OK" on the display.Anonymous Login
Illustration 3 g01749617
"Login Failed" windowThe application will allow a user to perform a login as "Unknown". This feature allows operators that cannot provide an ID to continue to operate the machine. If the operator enters an ID which is not found in the operator ID file, the "Login Failed" window will appear.Configuration Keys
Table 1
List of Configuration Keys
Configuration Key Description
"$ Logon Required" This key requires an operator to perform a login to operate the system.
"$ Save User" When the monitor display group is powered up, this key will automatically display the "Logon Confirmation" window with the user ID of the previous user.
"$ Use Login List" This key specifies how the user will enter the user ID.
"$ No Operator Id Verification" This key prevents the use of "Unknown" operator login. Refer to Table 1 for information about the configuration keys that are applicable for the login procedure. For further information, refer to Systems Operation, "Configuration Keys".Logging Out
To log out of the system, perform the following procedure:
Press the change operator button on the touchscreen for the display.The "Logout Confirmation" window will appear.
Illustration 4 g01749618
"Logout Confirmation" window
Illustration 5 g01897598
"Please Wait..." window
Select "Yes" to confirm the logout.Fleet onboard may be configured to allow time to send all pending Trimble Mincom Aquila Caterpillar (TMAC) messages to the office before the operator logs out. If this configuration exists, the "Please Wait..." window appears.
Click "OK". The "Select User Id" window appears.Once all of the pending messages have been sent, the following actions may occur:
A user may be selected from the "Select User Id" window to log in.
The machine may be shut down.Configuration Keys
Table 2
List of Configuration Keys
Configuration Key Description
"$ Log Out Wait Time" This key specifies the time period for waiting by the operator before the machine is shut down.
"$ Log Out Wait Message" This key specifies the text that will be displayed in the "Please Wait..." window.
"$ Log Out Ok Message" This key specifies the text that will be displayed in a window that appears when all messages have been sent. Refer to Table 2 for information about the configuration keys that are applicable for the logout procedure. For further information, refer to Systems Operation, "Configuration Keys".
Change operator button To log into the system, perform the following procedure:
Press the change operator button on the touchscreen for the display.One of the following windows will appear:
"Login Confirmation"
"Select User Id"
Illustration 1 g01749613
"Login Confirmation" window
Illustration 2 g01749614
"Select User Id" window
If the "Login Confirmation" window appears, confirm the login. Refer to Illustration 1. If the "Select User Id" window appears, enter a new user ID. Refer to Illustration 2. Choose an entry for a user ID from one of the following selections:
Selection tree
Selection menu
Keypad
Press the "OK" key on the touchscreen or press "OK" on the display.Anonymous Login
Illustration 3 g01749617
"Login Failed" windowThe application will allow a user to perform a login as "Unknown". This feature allows operators that cannot provide an ID to continue to operate the machine. If the operator enters an ID which is not found in the operator ID file, the "Login Failed" window will appear.Configuration Keys
Table 1
List of Configuration Keys
Configuration Key Description
"$ Logon Required" This key requires an operator to perform a login to operate the system.
"$ Save User" When the monitor display group is powered up, this key will automatically display the "Logon Confirmation" window with the user ID of the previous user.
"$ Use Login List" This key specifies how the user will enter the user ID.
"$ No Operator Id Verification" This key prevents the use of "Unknown" operator login. Refer to Table 1 for information about the configuration keys that are applicable for the login procedure. For further information, refer to Systems Operation, "Configuration Keys".Logging Out
To log out of the system, perform the following procedure:
Press the change operator button on the touchscreen for the display.The "Logout Confirmation" window will appear.
Illustration 4 g01749618
"Logout Confirmation" window
Illustration 5 g01897598
"Please Wait..." window
Select "Yes" to confirm the logout.Fleet onboard may be configured to allow time to send all pending Trimble Mincom Aquila Caterpillar (TMAC) messages to the office before the operator logs out. If this configuration exists, the "Please Wait..." window appears.
Click "OK". The "Select User Id" window appears.Once all of the pending messages have been sent, the following actions may occur:
A user may be selected from the "Select User Id" window to log in.
The machine may be shut down.Configuration Keys
Table 2
List of Configuration Keys
Configuration Key Description
"$ Log Out Wait Time" This key specifies the time period for waiting by the operator before the machine is shut down.
"$ Log Out Wait Message" This key specifies the text that will be displayed in the "Please Wait..." window.
"$ Log Out Ok Message" This key specifies the text that will be displayed in a window that appears when all messages have been sent. Refer to Table 2 for information about the configuration keys that are applicable for the logout procedure. For further information, refer to Systems Operation, "Configuration Keys".