ENGINE AR-COMPLETE 2649647 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3S-6224 Electric Hydraulic Pump Gp 1
141-1785 Receiving Sleeve 1
6V-3175 Double Acting Cylinder 1
9U-6809 Nut 1
9U-5346 Nut 1
B 140-7742 Sleeve 2
C 3S-6224 Electric Hydraulic Pump Gp 1
141-1785 Receiving Sleeve 1
9U-6811 Puller Stud 1
6V-0113 Double Acting Cylinder 1
9U-6809 Nut 1
Illustration 1 g01209880
Illustration 2 g01202290
Position bucket (1) on the ground. Position O-ring seals (2) from the pin joint onto the flanges of bucket (1).
Illustration 3 g01209896
Attach a suitable lifting device and Tooling (B) to Tooling (A). Attach Tooling (A) to pin assembly (4). The weight of Tooling (A) is approximately 137 kg (300 lb).
Remove bolt (3). Use Tooling (A) in order to remove pin assembly (4). The combined weight of Tooling (A) and pin assembly (4) is approximately 170 kg (375 lb). Note: Reposition the suitable lifting device as pin assembly (4) is removed.
Remove O-ring seals (2) (not shown).
Illustration 4 g01202427
Position O-ring seals (5) from the pin joint onto the flanges of bucket (1).
Illustration 5 g01223800
Attach a suitable lifting device and Tooling (B) to Tooling (C). Attach Tooling (C) to pin assembly (7). The weight of Tooling (C) is approximately 137 kg (300 lb).
Remove bolt (6). Use Tooling (C) in order to remove pin assembly (7). The combined weight of Tooling (C) and pin assembly (7) is approximately 170 kg (375 lb). Note: Reposition the suitable lifting device as pin assembly (7) is removed.
Remove O-ring seals (5) (not shown).
Use the machine hydraulics in order to raise the stick from bucket (1).
Illustration 6 g01202447
Remove bolts (11), plate (10), shims (9), and flange (8) from bucket (1).