ENGINE AR-COMPLETE 2661857 - Caterpillar

Illustration 2 g06060910
418-7811 Stick Lines Gp
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, hose assemblies, harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03683599
(2) 294-6503 Tube As
(3) 478-2098 Hose As
(6) 442-0234 Ball Valve
(8) 453-2836 Bolt
(10) 1P-3705 Rectangular Seal
(13) 306-1355 Half Clamp
(14) 5P-8077 Half Flange
(15) 453-2840 Bolt
(17) 8T-4121 Hard Washer
(18) 8T-4140 Bolt
(20) 8T-4193 Bolt
(24) 451-2175 Hard Washer
Install auxiliary lines group onto the right side of the stick.
Illustration 4 g06060911
(1) 247-9082 Tube As
(4) 519-5004 Hose As
(5) 389-2407 Manual Valve Gp
(8) 453-2836 Bolt
(9) 1P-3704 Rectangular Seal
(11) 1P-5767 Half Flange
(12) 306-1354 Half Clamp
(15) 453-2840 Bolt
(16) 7X-0584 Hard Washer
(17) 8T-4121 Hard Washer
(19) 8T-4183 Bolt
(21) 8T-4194 Bolt
(22) 8T-4223 Hard Washer
(24) 451-2175 Hard Washer
Install auxiliary lines group onto the left side of the stick.
Unless specified, tighten all hardware and fittings to standard torque.
Illustration 5 g00687600
Check for leaks.