ENGINE AR-COMPLETE 2712219 - Caterpillar

2712219 ENGINE AR-COMPLETE Caterpillar parts D10T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2712219
271-2219
2712219

Weight: 7000 pounds 3175 kg.

Buy ENGINE AR-COMPLETE 2712219 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Related part:

2712219 ENGINE AR-BASIC 10R7244 R

2712219 SHORT BLOCK 10R9377 R

2712219 LONG BLOCK M 20R7050 R

This part in 4 request: Show. This information for suppliers only!

2024-11-20

2020-01-07

2020-01-07

2016-03-14

Compatible equipment models: 2712219:

TRACK-TYPE TRACTOR D10T Caterpillar

For full view, you need register

Information:

Illustration 1 g01212856
Disconnect grease hose assembly (1) from boom cylinder (3). Remove bolts (2). Remove the retainer plate and spacer (4).
Illustration 2 g01212871
Illustration 3 g01212838
Attach a suitable lifting device to boom cylinder (3). The weight of boom cylinder (3) is approximately 287 kg (633 lb). Install Tooling (A) into pin (5). Use a hammer to drive pin (5) out of boom cylinder (3). Lower boom cylinder (3) .Note: Remove any shims that may be present. Mark the shims for installation purposes.
Repeat Steps 1 through 2 for the other boom cylinder.
Illustration 4 g01212891
Remove bolts (6). Remove cover (7) .
Illustration 5 g01212899
Remove three bolts (8). Remove step (9) .
Illustration 6 g01212931
Illustration 7 g01212925
Open cover (10) of the storage box. Remove bolts (13). Remove bolts (12) and remove handhold (11) .
Illustration 8 g01228933
Position retainer plate (4) and bolts (2) onto each side of pin (5). Attach a suitable lifting device to each side of pin (5) .
Illustration 9 g01217554
Illustration 10 g01212951
Attach a suitable lifting device to pin assembly (15). The weight of pin assembly (15) is approximately 48 kg (105 lb). Install pin assembly (15) and install bolt (16) .
Attach Tooling (B) and a suitable lifting device to boom (14) and pin assembly (15). The combined weight of boom (14) and the stick cylinder is between 1500 kg (3300 lb) and 3016 kg (6650 lb). Apply slight lifting tension to boom (14) .
Illustration 11 g01212965
Disconnect hose assemblies (17) .
Illustration 12 g01212967
Disconnect harness assembly (19). Disconnect hose assemblies (18), (20), (21), and (22) .
Illustration 13 g01212979
Illustration 14 g01212983
Remove bolt (24). Attach a suitable lifting device to Tooling (C). The weight of Tooling (C) is approximately 136 kg (300 lb). Attach Tooling (C) to pin assembly (23). Use Tooling (C) in order to remove pin assembly (23). The combined weight of Tooling (C) and pin assembly (23) is approximately 215 kg (475 lb).
Remove the boom. Remove any shims that may be present.Note: Note the locations of any shims for assembly purposes.