2723087 ENGINE AR-COMPLETE Caterpillar parts
772
Rating:
Alternative (cross code) number:
CA2723087
272-3087
2723087
CA2723087
272-3087
2723087
Weight: 3999 pounds 1814 kg.
TRUCK,
Related part:
2723087
SHORT BLOCK
10R9086
R
2723087
ENGINE AR-COMPL
20R1352
R
Compatible equipment models: 2723087:
For full view, you need register
Information:
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01171868
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install the O-ring seal onto plug (9) .
Assemble plug (9), rod (10), retainer (11), seat (12), spring (13), washer (14), retainer (15), spool (16), and spring (17) .
Install the valve assembly into the valve body.
Repeat Steps 1 through 3 for the remaining valves.
Illustration 2 g01171867
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install mounting plate (7), shims (6), reaction plate (5), and bolt (4) (not shown) onto valve body (8) .
Illustration 3 g01171866
Install handle assembly (3) and secure nut (2) .
Illustration 4 g01171865
Reposition boot (1) .End By: Install the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Joystick) - Install".
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01171868
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install the O-ring seal onto plug (9) .
Assemble plug (9), rod (10), retainer (11), seat (12), spring (13), washer (14), retainer (15), spool (16), and spring (17) .
Install the valve assembly into the valve body.
Repeat Steps 1 through 3 for the remaining valves.
Illustration 2 g01171867
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install mounting plate (7), shims (6), reaction plate (5), and bolt (4) (not shown) onto valve body (8) .
Illustration 3 g01171866
Install handle assembly (3) and secure nut (2) .
Illustration 4 g01171865
Reposition boot (1) .End By: Install the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Joystick) - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
2415935
ENGINE AR-CORE
657E, 657G, 772, AD45B, AD55, PM-200, PM-201
657E, 657G, 772, AD45B, AD55, PM-200, PM-201