ENGINE AR-COMPLETE 2726915 - Caterpillar

2726915 ENGINE AR-COMPLETE Caterpillar parts C18

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2726915
272-6915
2726915

Buy ENGINE AR-COMPLETE 2726915 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Related part:

2726915 SHORT BLOCK 20R3120 R

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Brake X Front Brake Rotors Kit replacement for 2013-2015 Acura ILX | ARES Semi Coated Rotors

$68.66

10 Dec 2024

US: Super Brakes

Brake X Front Brake Rotors Kit replacement for 2013-2015 Acura ILX | ARES Semi Coated Rotors
Brake X Get The Right Fit: The front rotors kit are for 2013 2014 2015 ILX (2013-2015: Hybrid) || 2 Piece Brake Rotors Kit Replacement: The brake rotors front kit comes with 2 semi-coated front brake rotors that are built to exceed OEM Specification using quality materials for performance and long term use. || Semi GEOMET Protected: Our front automotive replacement brake rotors are made using G3000 grade cast iron with a partial GEOMET coating at the hat and the edge of the rotors to offer just the right balance of performance, quality, durability and affordability. It’s partially resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || Smoothened and Balanced: Our rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X Rotors kit are engineered to elevate your driving experience and to back you up at your every turn. || Quality That Matters: All Brake X Rotor are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as go make every turns.

For full view, you need register

Compatible equipment models: 2726915:

GENERATOR SET C18 Caterpillar

Information:

1. Lower the blade to the ground. Put identification on the oil lines as to their location. Remove oil lines (2) from the cylinder.2. Remove bolts (4) from the cap. Remove the cap and the insert and shims.3. Fasten a hoist to the cylinder. Remove four bolts (3) that hold the cap to the blade lift arm.4. Remove blade lift cylinder (1). Weight is approximately 87 kg (192 lbs.). 5. Remove caps (5) from the blade lift cylinder. Remove the bearings and seals (6) from the caps. The following steps are for installation of the blade lift cylinders. 6. Put caps (5) in position on a press. Install the bearings with tooling (A).
Tooling (A) and a press must be used when installing bearings to prevent damage.
7. Install a new seal (6) in each cap (5) with tooling (A). Install the seals with the lip toward the inside of the cap. Install caps (5) on cylinder (1).8. Fasten a hoist to cylinder (1) and position it on the machine. Install the cap and four bolts (3) that hold the cylinder to the lift arm.9. Install oil lines (2) to their correct location on the cylinder. 10. Put 5P960 Grease on the inside surfaces of inserts (9) and (11).11. Install new insert (9) and shim (8) on ballstud (7). Start the engine. Move cylinder (6) in position on the ballstud. Install a new insert (11) and shim (12) in cap (13). Put cap (13) and shim (10) in position on ball stud (7) and cylinder rod (6). Install bolts (4).12. Fill the hydraulic tank with oil to its correct level. See the Operation and Maintenance Manual.