2870070 ENGINE AR-COMPLETE Caterpillar parts
320C, 320C L
Rating:
Alternative (cross code) number:
CA2870070
287-0070
2870070
CA2870070
287-0070
2870070
Weight: 1234 pounds 559 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WGBNIF 2pcs Headlamp Headlight Bracket Mount Set Left Driver and Right Passenger Lower Side Housing for Nissan for Xterra 2005-2009 NI2508104 26040ZP01A 287-0070 NI2509104
WGBNIF Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Quantity Sold:Set of 2 || Part Name:Headlight Bracket
WGBNIF Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Quantity Sold:Set of 2 || Part Name:Headlight Bracket
Bascowto 2pcs Headlamp Headlight Bracket Mount Set Left Driver and Right Passenger Lower Side Housing for Nissan for Xterra 2005-2009 NI2508104 26040ZP01A 287-0070 NI2509104
Bascowto Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Quantity Sold:Set of 2 || Part Name:Headlight Bracket
Bascowto Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Quantity Sold:Set of 2 || Part Name:Headlight Bracket
HUZOK 2pcs Headlamp Headlight Bracket Mount Set Left Driver and Right Passenger Lower Side Housing for Nissan for Xterra 2005-2009 NI2508104 26040ZP01A 287-0070 NI2509104
HUZOK Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Deals:Over || Quantity Sold:Set of 2 || Part Name:Headlight Bracket || Built Standard: Care to meet industry standards for quality control, ensuring reliable and consistent performance
HUZOK Fitment:for Nissan,for Xterra 2005-2009 || Item Offered:Set of 2 Headlight Brackets Head Light Lamp Headlamp Housing Left&Right Pair || Location: Left or Right || Part Number:NI2508104,NI2509104,26040ZP01A,26040ZP00A,26040EA001,26040EA000,16561352 || Item Offered:(2) Headlight Brackets;1 (1) Passenger Side,Lower Headlight Bracket,1 (1) Driver Side,Lower Headlight Bracket [Left Side,Lower || Deals:Over || Quantity Sold:Set of 2 || Part Name:Headlight Bracket || Built Standard: Care to meet industry standards for quality control, ensuring reliable and consistent performance
For full view, you need register
Information:
The Engine Control Module (ECM) detects the following conditions:
The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).
The engine coolant temperature is greater than 99 °C (210.2 °F).
The engine has been running for at least 30 seconds.Note: This diagnostic code represents a critical event. This diagnostic code does not represent an electronic system fault.System Response:The check engine lamp will flash.This diagnostic code requires a customer password in order to be cleared."DIAG" will be displayed next to the status for "Intake Manifold Air Temperature" on Caterpillar Electronic Technician (ET).Possible Performance Effect:The ECM does not derate the power. Also, the ECM does not limit the engine rpm or the vehicle speed due to this diagnostic code.Troubleshooting:This diagnostic code indicates an excessive temperature in the air intake manifold. This diagnostic code does not indicate a problem with the ECM or a problem with the temperature sensor for the air intake manifold.Test Step 1. Check for Diagnostic Codes.
Ensure that Cat ET is connected to the data link connector.
Turn the ignition key switch to the ON position. The engine should be off.
Check for any active diagnostic codes or logged diagnostic codes. Expected Result:There should be no diagnostic codes that are present.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the diagnostic codes that are present. For further details, refer to Troubleshooting, "Troubleshooting With a Diagnostic Code".Ensure that the repair eliminates the problem.STOPTest Step 2. Inspect Electrical Connectors and Wiring.
Turn the ignition key switch to the OFF/RESET position.
Thoroughly inspect the following connectors:
J2/P2 ECM engine harness connector
J1/P1 ECM vehicle harness connector
Connector terminals for the sensorRefer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that are associated with the inlet manifold temperature sensor.
Check the ECM connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Check the harness and wiring for abrasion and pinch points from the appropriate sensor back to the ECM. Expected Result:All connectors, pins and sockets are completely coupled and/or inserted and the harness and wiring are free of corrosion, of abrasion or of pinch points.Results:
OK - Proceed to Test Step 3.
Not OK - There is a problem with the wiring.Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled. Verify that the repair eliminates the problem.STOPTest Step 3. Check the Sensor in the Engine.
Ensure that the temperature of the engine is cool before starting this procedure.
Turn the ignition key switch to the ON position.
Note the temperature for the sensor on the status screen .
Start the engine but remain parked.
Monitor the intake manifold air temperature on the status screen as the engine is warming. Expected Result:The temperature before starting the engine should be within reasonable limits, and the temperature increases as the engine warms.Note: The engine may require several hours to
The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).
The engine coolant temperature is greater than 99 °C (210.2 °F).
The engine has been running for at least 30 seconds.Note: This diagnostic code represents a critical event. This diagnostic code does not represent an electronic system fault.System Response:The check engine lamp will flash.This diagnostic code requires a customer password in order to be cleared."DIAG" will be displayed next to the status for "Intake Manifold Air Temperature" on Caterpillar Electronic Technician (ET).Possible Performance Effect:The ECM does not derate the power. Also, the ECM does not limit the engine rpm or the vehicle speed due to this diagnostic code.Troubleshooting:This diagnostic code indicates an excessive temperature in the air intake manifold. This diagnostic code does not indicate a problem with the ECM or a problem with the temperature sensor for the air intake manifold.Test Step 1. Check for Diagnostic Codes.
Ensure that Cat ET is connected to the data link connector.
Turn the ignition key switch to the ON position. The engine should be off.
Check for any active diagnostic codes or logged diagnostic codes. Expected Result:There should be no diagnostic codes that are present.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the diagnostic codes that are present. For further details, refer to Troubleshooting, "Troubleshooting With a Diagnostic Code".Ensure that the repair eliminates the problem.STOPTest Step 2. Inspect Electrical Connectors and Wiring.
Turn the ignition key switch to the OFF/RESET position.
Thoroughly inspect the following connectors:
J2/P2 ECM engine harness connector
J1/P1 ECM vehicle harness connector
Connector terminals for the sensorRefer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that are associated with the inlet manifold temperature sensor.
Check the ECM connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Check the harness and wiring for abrasion and pinch points from the appropriate sensor back to the ECM. Expected Result:All connectors, pins and sockets are completely coupled and/or inserted and the harness and wiring are free of corrosion, of abrasion or of pinch points.Results:
OK - Proceed to Test Step 3.
Not OK - There is a problem with the wiring.Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled. Verify that the repair eliminates the problem.STOPTest Step 3. Check the Sensor in the Engine.
Ensure that the temperature of the engine is cool before starting this procedure.
Turn the ignition key switch to the ON position.
Note the temperature for the sensor on the status screen .
Start the engine but remain parked.
Monitor the intake manifold air temperature on the status screen as the engine is warming. Expected Result:The temperature before starting the engine should be within reasonable limits, and the temperature increases as the engine warms.Note: The engine may require several hours to
Caterpillar SIS machinery equipment:
Caterpillar SIS
320C & 320C L Excavators MAB00001-UP (MACHINE) POWERED BY 3066 Engine »
287-0070
ENGINE AR-COMPLETE
320C & 320C L Excavators RAW00001-UP (MACHINE) POWERED BY 3066 Engine »
287-0070
ENGINE AR-COMPLETE
320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine »
287-0070
ENGINE AR-COMPLETE
320C L Excavator EAG00001-UP (MACHINE) POWERED BY 3066 Engine »
287-0070
ENGINE AR-COMPLETE
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
2977769
ENGINE AR-COMPLETE
320C, 320C L
320C, 320C L
2870092
ENGINE AR
320C, 320C L
320C, 320C L
320C, 320C L
2013835
ENGINE AR
320C, 320C L
320C, 320C L
2175472
ENGINE AR
320C, 320C L
320C, 320C L
2977768
ENGINE AR-COMPLETE
320C, 320C L
320C, 320C L
2228188
ENGINE AR
320C, 320C L
320C, 320C L
2666278
ENGINE AR
320C
320C
3850474
ENGINE AR-COMPLETE
906H2, 907H2, 908H2
906H2, 907H2, 908H2
4S6967
ENGINE MOUNTING HARDWARE GROUP
977K, 977L
977K, 977L
1013148
ENGINE AR
3116
3116
2724738
ENGINE AR-COMPLETE
320D LN, 323D LN
320D LN, 323D LN
4W8050
ENGINE AR
3408
3408
3848428
ENGINE AR-CORE
D6R III, D6T
D6R III, D6T