ENGINE AR 2870104 - Caterpillar

Illustration 17 g00635659
Install tube assembly (23) and tighten clamp (22) .
Illustration 18 g00635658
Install clamp (21) .
Illustration 19 g00635657
Connect tube assembly (20) and tighten clamp (19) .
Connect two hose assemblies (17) and (18) .
Illustration 20 g00635656
Connect hose assemblies (14) and (15) to the power train oil cooler (16) .
Illustration 21 g00635655
Connect the coolant drain line (12) for the engine oil cooler (13) .
Illustration 22 g00635653
Connect hose assembly (11) for the fuel/water separator.
Illustration 23 g00635652
Connect four coolant hose assemblies (10) .
Illustration 24 g00635650
Place hoses (9) in position.
Install bolt (8) and two clamps.
Illustration 25 g00635649
Install lower front panel (2) and two bolts (6) and (7) .
Illustration 26 g00635648
Install bolt (5) and the clamp.
Illustration 27 g00635647
Install bolt (3) to bracket (4) .
Illustration 28 g00635646
Install two bolts (1) to lower front panel assembly (2) .
Evacuate the air conditioner system. Charge the air conditioner system. The correct charge is 2.3 kg (5.0 lb). Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Fill the implement hydraulic system. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
Fill the cooling system. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
Fill the transmission with oil. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.End By:
Install the power train guard. Refer to Disassembly and Assembly, "Power Train Guard (Transmission) - Remove and Install" for the machine that is being serviced.
Install the input drive shaft. Refer to Disassembly and Assembly, "Input Drive Shaft - Remove and Install" for the machine that is being serviced.
Install the axle oil cooler pump. Refer to Disassembly and Assembly, "Gear Pump (Axle Oil Cooler) - Remove and Install" for the machine that is being serviced.
Install the implement pump. Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install" for the machine that is being serviced.
Install the steering pump. Refer to Disassembly and Assembly, "Piston Pump (Steering) - Install" for the machine that is being serviced.
Install the pump for pilot and braking. Refer to Disassembly and Assembly, "Gear Pump (Pilot and Braking) - Install" for the machine that is being serviced.
Install the hood and engine enclosure. Refer to Disassembly and Assembly, "Hood and Engine Enclosure - Install" for the machine that is being serviced.
Install the front and rear hood panels. Refer to Disassembly and Assembly, "Hood Panels (Front and Rear) - Install" for the machine that is being serviced.
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install" for the machine that is being serviced.