ENGINE AR 2P6808 - Caterpillar

2P6808 ENGINE AR Caterpillar parts D6C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2P6808
2P-6808
2P6808

Weight: 0.30 pounds 0 kg.

Buy ENGINE AR 2P6808 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 2P6808:

TRACK-TYPE TRACTOR D6C Caterpillar

For full view, you need register

Information:

The Engine Control Module (ECM) detects the following conditions:
The battery voltage is greater than 9 VDC.
The ECM detects high current for the Injection actuation pressure control valve for more than 120 milliseconds when the driver is in the ON position.System Response:While the engine is running and the fault code is active, the ECM will cycle the injection actuation pressure control valve on and off. The injection actuation pressure control valve will default to 7.5 MPa (1087.80 psi).31% will be displayed next to the status for the "Injection Actuation Current" on Caterpillar Electronic Technician (ET).The check engine lamp will illuminate.Possible Performance Effect:The engine may run rough. The engine may also have low power. This diagnostic code may also cause the engine to shutdown.Troubleshooting:Test Step 1. Perform the following diagnostic procedure: "Injection Actuation Pressure Control Valve Circuit - Test"Results:
OK - STOP