ENGINE AR 2W3691 - Caterpillar

Table 3
Parts Replacement for the 8E-7168 Shaft As    
Remove the following parts:    Install the following parts:    Clutch Group    
Item    Quantity    Part    Quantity    Part    
2     1     9X-2309 Retaining Ring     1     9U-8875 Retaining Ring     Reverse    
3     1     9W-9718 Spring Retainer     1     8E-5727 Spring Retainer     Reverse    
4     1     9W-9340 Thrust Disc     1     8E-8313 Thrust Disc     Reverse    
5     1     9X-2309 Retaining Ring     1     9U-8875 Retaining Ring     Second    
6     1     6Y-5631 Plate (1)     1     None     Second    
7     1     6Y-6934 Disc Spring     1     None     Second    
8     1     6Y-2833 End Plate (2)
    1     6Y-8160 End Plate     Second    
( 1 ) The total number of 6Y-5631 Plates is reduced by one plate.
( 2 ) This part is replaced in the 8E-7230 Clutch for S/N:1SF
, S/N:; 1YK
and S/N:; 1KF
models only. No action is required for S/N:; 2CK
, S/N:; 3TJ
and S/N:; 4EL
models.Details for the parts replacement for the 8E-7169 Shaft As are provided in Illustration 2 and Table 4.
Illustration 2 g00717061
(1) 8E-7169 Shaft As (2) 9X-2309 Retaining Ring (3) 9W-9718 Spring Retainer (4) 9W-9340 Thrust Disc (5) 9X-2309 Retaining Ring (6) 6Y-2833 End Plate
Table 4
Parts Replacement for the 8E-7169 Shaft As    
Remove the following parts:    Install the following parts:    Clutch Group    
Item    Quantity    Part Number
Description    Quantity    Part Number
Description    
2     1     9X-2309 Retaining Ring     1     9U-8875 Retaining Ring     Forward Low Speed    
3     1     9W-9718 Spring Retainer     1     8E-5727 Spring Retainer     Forward Low Speed    
4     1     9W-9340 Thrust Disc     1     8E-8313 Thrust Disc     Forward Low Speed    
5     1     9X-2309 Retaining Ring     1     9U-8875 Retaining Ring     Forward High Speed    
6     1     6Y-2833 End Plate (1)
    1     6Y-8160 End Plate     Forward High Speed    
( 1 ) This part is replaced in the 8E-7229 Clutch for S/N:1SF
, S/N:; 1YK
and S/N:; 1KF
models only. No action is required for S/N:; 2CK
, S/N:; 3TJ
and S/N:; 4EL
models.