3013356 ENGINE AR-PRIMARY Caterpillar parts
924H, C6.6
Rating:
Alternative (cross code) number:
CA3013356
301-3356
3013356
CA3013356
301-3356
3013356
Weight: 1388 pounds 629 kg.
INDUSTRIAL ENGINE, WHEEL LOADER,
Related part:
3013356
BLOCK GP-LONG
20R2455
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
FESTO EGC-80-800-TB-KF-0H-GK 3013356 Spindle Axis
tahstyk FESTO Original Brand New Product || Please check the model and product number of the product you need before placing an order Specifications || After you place an order,we will place an order with FESTO as soon as possible. Of course, it takes time for FESTO to supply us, and you need to wait. || Because there are many product models, if you cannot find the product you want in our store, please contact us and we will provide you with our service and price.
tahstyk FESTO Original Brand New Product || Please check the model and product number of the product you need before placing an order Specifications || After you place an order,we will place an order with FESTO as soon as possible. Of course, it takes time for FESTO to supply us, and you need to wait. || Because there are many product models, if you cannot find the product you want in our store, please contact us and we will provide you with our service and price.
FESTO Electric Cylinder EGC-80-800-TB-KF-0H-GK 3013356
tahstyk FESTO Original Brand New Product || Please check the model and product number of the product you need before placing an order Specifications || After you place an order,we will place an order with FESTO as soon as possible. Of course, it takes time for FESTO to supply us, and you need to wait. || Because there are many product models, if you cannot find the product you want in our store, please contact us and we will provide you with our service and price.
tahstyk FESTO Original Brand New Product || Please check the model and product number of the product you need before placing an order Specifications || After you place an order,we will place an order with FESTO as soon as possible. Of course, it takes time for FESTO to supply us, and you need to wait. || Because there are many product models, if you cannot find the product you want in our store, please contact us and we will provide you with our service and price.
$49.05
14 Sep 2023
LT: Roberto Parts L
Front Left Driveshaft Cover 8K0863187B 2014
Namz Custom Cycle Compatible with Audi || Replacement for Q5 8R model(-s) || OEM part number reference: 8K0863187B || If you are unsure if this is correct item for your vehicle, please contact us via seller message and indicate that you are refering to the item no: 8K0863187B Need other item, but are unable to find it? You can also contact seller asking for help, please indicate what kind of item you are looking for.
Namz Custom Cycle Compatible with Audi || Replacement for Q5 8R model(-s) || OEM part number reference: 8K0863187B || If you are unsure if this is correct item for your vehicle, please contact us via seller message and indicate that you are refering to the item no: 8K0863187B Need other item, but are unable to find it? You can also contact seller asking for help, please indicate what kind of item you are looking for.
For full view, you need register
Information:
Probable Causes
Engine oil cooler core
Jacket water pump
Auxiliary water pump (if equipped)
Water-cooled turbocharger (if equipped)
Air compressor (if equipped)
Cylinder head
Cylinder liner
Cylinder blockRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in the order of the listed test steps.
Table 1
Troubleshooting Test Steps Values Results
1. Check for Leaks in Engine Oil Cooler Core
Cooler
Result: A leak was not found.
Proceed to the next step.
Result: A leak was found.
Repair: Install a new oil cooler core.
Drain the crankcase and refill the crankcase with clean engine oil.
Install new engine oil filters. Refer to the Operation and Maintenance Manual.
If the problem is not resolved, proceed to the next step.
2. Check the Jacket Water Pump
A. Check the weep hole of the jacket water pump for plugging. A plugged weep hole may cause coolant to be forced past the pump shaft seals into the crankcase.
B. Thoroughly inspect the water pump for damage and cracks. If internal leakage is suspected, remove the pump from the engine in order to perform a thorough inspection.
Pump
Result: The weep hole was not plugged and the pump is not damaged.
Proceed to the next step.
Result: The weep hole was plugged.
Repair: Clear the plug.
Result: If a continuous drip is found coming from the water pump weep hole when the engine is off, or a constant stream when the engine is running,
Repair: Replace the water pump shaft seal, or replace the water pump.
Note: An intermittent drip coming from the weep hole is an acceptable amount of leakage. Intermittent dripping can start and
Engine oil cooler core
Jacket water pump
Auxiliary water pump (if equipped)
Water-cooled turbocharger (if equipped)
Air compressor (if equipped)
Cylinder head
Cylinder liner
Cylinder blockRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in the order of the listed test steps.
Table 1
Troubleshooting Test Steps Values Results
1. Check for Leaks in Engine Oil Cooler Core
Cooler
Result: A leak was not found.
Proceed to the next step.
Result: A leak was found.
Repair: Install a new oil cooler core.
Drain the crankcase and refill the crankcase with clean engine oil.
Install new engine oil filters. Refer to the Operation and Maintenance Manual.
If the problem is not resolved, proceed to the next step.
2. Check the Jacket Water Pump
A. Check the weep hole of the jacket water pump for plugging. A plugged weep hole may cause coolant to be forced past the pump shaft seals into the crankcase.
B. Thoroughly inspect the water pump for damage and cracks. If internal leakage is suspected, remove the pump from the engine in order to perform a thorough inspection.
Pump
Result: The weep hole was not plugged and the pump is not damaged.
Proceed to the next step.
Result: The weep hole was plugged.
Repair: Clear the plug.
Result: If a continuous drip is found coming from the water pump weep hole when the engine is off, or a constant stream when the engine is running,
Repair: Replace the water pump shaft seal, or replace the water pump.
Note: An intermittent drip coming from the weep hole is an acceptable amount of leakage. Intermittent dripping can start and
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
3131219
ENGINE AR
C6.6
C6.6
2401861
ENGINE AR-COMPLETE
330D, 330D FM, 330D L, 330D MH, 336D L
330D, 330D FM, 330D L, 330D MH, 336D L
1152977
ENGINE AR
3176B
3176B
9Y9280
ENGINE AR
3208
3208
3013357
ENGINE AR-PRIMARY
924H, 924HZ, C6.6
924H, 924HZ, C6.6