ENGINE AR-COMPLETE 3059665 - Caterpillar

Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes in order to prevent fluid loss and to keep contaminants from entering the system.
Drain the engine coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g02796362
Illustration 2 g02796506
Loosen clamps and remove hoses (1). Remove bolts (2) and remove reservoir (3).
Illustration 3 g02796514
Loosen clamps (4) and remove upper radiator hose from radiator. Remove clamps (5) and remove air intake hose.
Illustration 4 g02796744
Lower radiator hose and clamp are not visible in this photo.
Loosen clamp and remove the lower radiator hose from the radiator (6).
Illustration 5 g02797037
Illustration 6 g02797048
Bolts are not visible in this photo.
Illustration 7 g02797069
Remove bolt (8). Remove bolts (9) and (10) and remove radiator from the lower bracket. Installation Procedure
Illustration 8 g02797218
Illustration 9 g02797219
Install radiator onto lower bracket and install bolts (9) and (8).
Illustration 10 g02797223
Install bolts (10).
Illustration 11 g02797227
Lower radiator hose and clamp are not visible in this photo.
Connect lower radiator hose and tighten clamp (6).
Illustration 12 g02797230
Connect upper radiator hose (4) and tighten clamp. Install air intake hose and tighten clamps (5).
Illustration 13 g02797235
Illustration 14 g02797236
Position reservoir (3) and install bolts (2). Connect hoses and tighten clamps (1).
Fill the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" End By:
Install hydraulic oil cooler.
Install air conditioning refrigerant condenser.
Close hood.