ENGINE AR-COMPLETE 3115007 - Caterpillar

Illustration 1 g00764821
(1) Lubricate the face of the locknut and threads of the locknut prior to assembly. Torque for locknut ... 3600 180 N m (2655 130 lb ft) (2) Lubricate the inside diameter and the outside diameter with clean grease. (3) Rod assembly Diameter of rod ... 69.930 0.030 mm (2.7531 0.0012 inch) Minimum thickness for plating ... 0.033 0.007 mm (0.0013 0.0003 inch) (4) Bore of head ... 70.63 0.03 mm (2.781 0.001 inch) (5) Lubricate the sealing lip slightly with the lubricant that is being sealed. (6) Apply 7M-7456 Bearing Mount Compound to the groove of the wiper seal prior to assembly. (7) 137-2919 Sleeve Bearing Outside diameter ... 95.180 0.013 mm (3.7472 0.0005 inch) Inside diameter ... 80.2925 0.0425 mm (3.1611 0.0017 inch) Install the bearing in the bearing bore. ... 5.00 0.50 mm (0.197 0.020 inch) (8) Lubricate the sealing lip slightly with the lubricant that is being sealed. Install the seal in the bearing bore. ... 0.50 0.50 mm (0.020 0.020 inch) (9) Bore of the cylinder ... 100.00 0.10 mm (3.937 0.004 inch) (10) 180-7558 Sleeve Bearing Outside diameter ... 85.102 0.011 mm (3.3505 0.0004 inch) Inside diameter ... 70.230 0.020 mm (2.7650 0.0008 inch) Install the bearing in the bearing bore. ... 7.35 0.50 mm (0.289 0.020 inch) (11) Lubricate the sealing lip slightly with the lubricant that is being sealed. Install the seal in the bearing bore. ... 1.00 0.50 mm (0.039 0.020 inch)