3119918 ENGINE AR-COMPLETE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA3119918
311-9918
3119918
CA3119918
311-9918
3119918
TRUCK ENGINE,
Compatible equipment models: 3119918:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00952641
Disconnect tube assembly (1) .
Illustration 2 g00952643
Remove nuts (8) and flange (7) .
Remove bolts (4) and (5) .
Remove the nuts and studs (6). Remove front cover bolts (3), front cover (2), and the gasket.
Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00952641
Disconnect tube assembly (1) .
Illustration 2 g00952643
Remove nuts (8) and flange (7) .
Remove bolts (4) and (5) .
Remove the nuts and studs (6). Remove front cover bolts (3), front cover (2), and the gasket.