3144580 ENGINE AR-COMPLETE Caterpillar parts
C15
Rating:
Alternative (cross code) number:
CA3144580
314-4580
3144580
CA3144580
314-4580
3144580
TRUCK ENGINE,
Compatible equipment models: 3144580:
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system to a level below the coolant temperature sensor. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure.
Illustration 1 g02798196
Disconnect harness assembly (2) from coolant temperature sensor (1).
Use a deep socket in order to remove coolant temperature sensor (1) from water temperature regulator (3). Installation Procedure
Install coolant temperature sensor (1) in the reverse order of removal.
Use caution when tighten down harness assembly (2).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system to a level below the coolant temperature sensor. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining procedure.
Illustration 1 g02798196
Disconnect harness assembly (2) from coolant temperature sensor (1).
Use a deep socket in order to remove coolant temperature sensor (1) from water temperature regulator (3). Installation Procedure
Install coolant temperature sensor (1) in the reverse order of removal.
Use caution when tighten down harness assembly (2).