ENGINE AR 3244141 - Caterpillar

Table 2
DISPLAY "TOOL #6" "TOOL #7" "TOOL #8" "TOOL #9" "TOOL #10"
"TOOL PROGRAM: GENERAL"
Name of the tool "NAME" 0 0 0 0 0
Maximum position of the dial for the throttle "MAX DIAL" 10 10 10 10 10
Minimum position of the dial for the throttle "MIN DIAL" 1 1 1 1 1
Combiner for two pump flow "COMBINER ENABLE" ENABLED ENABLED ENABLED ENABLED ENABLED
Initial power reduction of the main pump "INT PUMP POWER RE" 5.0% 5.0% 5.0% 5.0% 5.0%
329D2,
330D2
0% 329D2,
330D2
0% 329D2,
330D2
0% 329D2,
330D2
0% 329D2,
330D2
0%
Total power reduction of the main pump "TOTAL PUMP POWER RE" 30.0% 30.0% 30.0% 30.0% 30.0%
Temperature of the high temperature warning for the hydraulic oil " HYD TEMP" 126° C (259 ° F) 126° C (259 ° F) 126° C (259 ° F) 126° C (259 ° F) 126° C (259 ° F)
"TOOL PROGRAM: ATTACHMENT #1 VALVE"
Flow settings of the number 1 attachment valve "A1 FLOW" 326D2
160 L/min (42.3 US gpm) 326D2
160 L/min (42.3 US gpm) 326D2
160 L/min (42.3 US gpm) 326D2
160 L/min (42.3 US gpm) 326D2
160 L/min (42.3 US gpm)
329D2,
330D2
180 L/min (48 US gpm) 329D2,
330D2
180 L/min (48 US gpm) 329D2,
330D2
180 L/min (48 US gpm) 329D2,
330D2
180 L/min (48 US gpm) 329D2,
330D2
180 L/min (48 US gpm)
Additional flow for the number 1 attachment valve during multiple operation "A1 MULTI ADD FLOW" 0 L/min (0 US gpm) 0 L/min (0 US gpm) 0 L/min (0 US gpm) 0 L/min (0 US gpm) 0 L/min (0 US gpm)
Maximum pressure for the extension of the number 1 attachment valve "A1 EXTND MAX PRES" 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi)
Maximum pressure for the retraction of the number 1 attachment valve "A1 RETCT MAX PRES" 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi) 0 kPa (0 psi)
Open time of the number 1 attachment valve "A1 OPEN TIME" 0.2 Seconds 0.2 Seconds 0.2 Seconds 0.2 Seconds 0.2 Seconds
Close time of the number 1 attachment valve "A1 CLOSE TIME" 0.2 Seconds 0.2 Seconds 0.2 Seconds 0.2 Seconds