ENGINE AR-COMPLETE 3261604 - Caterpillar

Illustration 1 g03761656
Top view
Typical example
Table 1
Specification for 432-4885 Upper Frame and 432-4891 Upper Frame
Item Qty Part Specification Description
Before assembly, use 5P-0960 Grease Cartridge in order to coat all the pin bores.
1 As required, use the following shims to adjust the minimum lateral clearance to the maximum of 1.0 mm (0.04 inch):
2 212-2841 Shim Thickness is 2.00 0.15 mm (0.079 0.006 inch).
2 436-0262 Shim Thickness is 3.00 0.15 mm (0.118 0.006 inch).
2 As required, use the following shims to adjust the minimum lateral clearance to the maximum of 1.0 mm (0.04 inch):
2 133-2427 Shim Thickness is 0.5 mm (0.02 inch).
4 093-0090 Shim Thickness is 1.0 mm (0.04 inch).
A - - Clearance between the pin end and the side of the cab must be kept over 10.0 mm (0.39 inch).
3 2 117-5435 Pin As Diameter is 99.85 0.04 mm (3.931 0.002 inch).
4 1 324-0941 Pin As Diameter is 119.85 0.04 mm (4.718 0.002 inch).