ENGINE AR-COMPLETE 3261609 - Caterpillar

Illustration 1 g03762817
Typical example
Table 1
Specification for 444-2090 Hoe Stick Gp and 468-4629 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for pins, bucket, bushings, and cylinder pin bores.
1 - - Assemble the stick cylinder so that the grease zerk is directed, as shown.
2 1 5I-3299 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
3 1 113-2963 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
4 2 166-1498 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 2 228-5621 Bushing(1) Bore before assembly is 120.259 0.040 mm (4.7346 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
6 2 235-7679 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 166-1496 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 2 241-7231 Bushing(1) Bore before assembly is 70.170 0.040 mm (2.7626 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
9 2 228-5617 Bushing(1) Bore before assembly is 100.216 0.040 mm (3.9455 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushings in the bore so that the part number of each bushing is facing outward.