3401705 ENGINE AR Caterpillar parts
420F, 428F, 430F, 432F
Rating:
Alternative (cross code) number:
CA3401705
340-1705
3401705
CA3401705
340-1705
3401705
BACKHOE LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$25.52
06 May 2024
US: USAutopartsCar
Sunsong 3401705 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
$24.26
09 Apr 2024
US: FinditParts Inc
Sunsong 3401705 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
$16.93
29 Sep 2023
Amazon.com
Sunsong 3401705 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
For full view, you need register
Information:
Position slider track (31) on upper housing (6). Install bolt (33), two bolts (32) and the washers. Tighten bolts (33) and (32) to a torque of 30 7 N m (22 5 lb ft). Install locknut (30) and the washer. Tighten locknut (30) to a torque of 40 8 N m (30 6 lb ft).
Illustration 2 g00275860
Illustration 3 g00275858
Position air spring (28) on scissor assembly (5). Apply Tooling (A) to the threads of bolt (27). Install bolt (27) that holds the air spring to scissor assembly (5). Tighten bolt (27) to a torque of 40 8 N m (30 6 lb ft).
Position tubes (12) and (22) on scissor assembly (5). Install new tie-wraps (29) to secure the tubes to the scissor assembly.
Connect tube (22) to fitting (26) on air spring (28). Install two bumpers (25).
Illustration 4 g00275857
Apply Tooling (B) to scissor assembly (5) at the point of installation for two rollers (24). Install two rollers (24) and two bearings (21). Connect tubes (12) and (22) to valve assembly (23).
Illustration 5 g00275856
Install fitting (11) in lower housing (14).
Illustration 6 g00275855
Typical Example
Install two bearings (17) and (20), damper (18), the pin and locknut (19). Tighten locknut (19) to a torque of 30 7 N m (22 5 lb ft). Install shaft (7) and cap (15) on damper (18).
Illustration 7 g00275854
Install scissor assembly (5) into lower housing (14). Install two tether belts (10).
Illustration 8 g00275851
Install the lower shaft assembly. Install locknut (13) and the lock washer. Tighten locknut (13) to a torque of 40 8 N m (30 6 lb ft).
Illustration 9 g00275850
Connect tube (12) to fitting (11).
Illustration 10 g00275849
Typical Example
Install two tether belts (10) and two bearings (9). Apply Tooling (B) to the scissor assembly at the point of installation for rollers (8). Install rollers (8) on the scissor assembly.
Illustration 11 g00275848
Apply Tooling (A) to the threads of screw (7). Install screw (7) to secure the air spring, which is not shown. Tighten the screw to a torque of 4.3 1 N m (38 9 lb in).
Illustration 12 g00275846
Install upper housing (6) on scissor assembly (5).
Illustration 13 g00275845
Typical Example
Install the upper shaft assembly, locknut (4), and the lock washer. Tighten the locknut to a torque of 40 8 N m (30 6 lb ft). Install locknut (4) and the lock washer. Apply Tooling (A) to the setscrew of knob (2). Install knob (2) and the setscrew.
Illustration 14 g00275844
Typical Example
Install boot (1).
Install the seat on the air suspension. Install the seat in the machine.
Caterpillar SIS machinery equipment:
Caterpillar SIS
432F Backhoe Loader LNR00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
420F Backhoe Loader LKH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
420F Backhoe Loader LTG00001-02342 (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
430F Backhoe Loader LNH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
430F Backhoe Loader LDY00001-00281 (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
428F Backhoe Loader LBH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1705
ENGINE AR
Parts engine Caterpillar catalog:
3751284
ENGINE AR-PRIMARY
420F, 428F, 430F, 432F, 434F, 444F
420F, 428F, 430F, 432F, 434F, 444F
3645753
ENGINE AR-PRIMARY
420F, 428F, 430F, 432F, 434F, 444F
420F, 428F, 430F, 432F, 434F, 444F
420F, 428F, 430F, 432F
3401706
ENGINE AR-COMPLETE
416F, 428F
416F, 428F
3401704
ENGINE AR-COMPLETE
416F, 422F, 428F
416F, 422F, 428F
3521451
ENGINE AR-PRIMARY
416F, 422F, 428F, 434F
416F, 422F, 428F, 434F
3751283
ENGINE AR-PRIMARY
416F, 428F
416F, 428F
4213014
ENGINE AR
797F
797F
3601647
ENGINE AR
797F
797F
3513790
ENGINE AR
797F
797F
3421219
ENGINE AR-PRIMARY
236B3, 252B3
236B3, 252B3
3491382
ENGINE AR
420E
420E
3547363
ENGINE AR-PRIMARY
428F, 432F
428F, 432F
3379867
ENGINE AR-COMPLETE
428F, 432F
428F, 432F
3379866
ENGINE AR-COMPLETE
428F, 432F
428F, 432F
4388666
ENGINE AR-COMPLETE
793F CMD
793F CMD
3377842
ENGINE AR-COMPLETE
793F CMD
793F CMD
3818006
ENGINE AR
793F CMD
793F CMD