ENGINE AR-COMPLETE 3411238 - Caterpillar

Roading the machine with the cab in the elevated position can cause bodily injury.To prevent the possibility of injury, only road the machine with the cab in the lowered position.
Crushing Hazard! Keep the work tool away from the cab during operation. Personal injury or death may result if the work tool contacts the cab during operation.
Note: Stop the machine before the cab riser is raised or lowered.
Illustration 1 g01180155
Move the switch to the ON position in order to activate the controls for the cab riser.
Illustration 2 g01180157
(A) Left Joystick
(B) Right Joystick
Push down on switch (1) that is on the top of the left joystick in order to lower the cab.
Push down on switch (2) that is on the top of the right joystick in order to raise the cab. Cab Lowering Control Device
If the engine is shut down or the hydraulic system fails, the operator can still lower the cab.Use the following procedure to lower the cab from the raised position while the operator is in the cab:
Illustration 3 g01204213
Turn the control lever that is located inside the cab on the right side in order to lower the cab. Use the following procedure from the ground to lower the cab from the raised position while the operator is in the cab:
Illustration 4 g01204216
Turn the control lever that is located behind the left front access door in order to lower the cab.