ENGINE AR 3418983 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
B - Guide Stud
5/8 - 18 by 8 inch 2 Start By:
Remove the generator. Refer to Disassembly and Assembly, "Generator - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01091639
Install Tooling (A) and a suitable lifting device on flywheel (2). The weight of flywheel (2) is approximately 85 kg (185 lb).
Remove two bolts (1). Install Tooling (B).
Remove remaining bolts (1). Remove flywheel (2).
Illustration 2 g01091705
Use a hammer and a punch in order to remove ring gear (3) from flywheel (2).