3421219 ENGINE AR-PRIMARY Caterpillar parts
236B3, 252B3
Rating:
Alternative (cross code) number:
CA3421219
342-1219
3421219
CA3421219
342-1219
3421219
Weight: 570 pounds 258 kg.
SKID STEER LOADER,
Information:
Refer to Table 1 for the required parts.
Illustration 1.This is a view of the LH door latch assembly.1. Remove the 162-8719 Door Latch Assembly from the LH door. Replace the 162-8719 Door Latch Assembly with the 190-4173 Door Latch Assembly.
Illustration 2.This is a view of the LH door striker assembly2. Remove the 6V-1155 Striker Assembly from the cab. Replace the 6V-1155 Striker Assembly with the 8T-3848 Striker Assembly.3. Remove the 8T-4156 Door Seal. Replace the 8T-4156 Door Seal with the 178-8894 Door Seal.After the installation of the new parts, adjust the door latch mechanism using the following procedure:1. Close the door and locate the striker.2. Make sure that the striker is centered vertically in the jaws of the 190-4173 Latch Assembly and that it does not cause the door to move up or down when the door is closing.3. Check for interference between the striker head and the jaws or latch case.4. If necessary, adjust the striker by adding or removing striker shims.5. Check for both secondary and primary latch positions. Primary
Illustration 1.This is a view of the LH door latch assembly.1. Remove the 162-8719 Door Latch Assembly from the LH door. Replace the 162-8719 Door Latch Assembly with the 190-4173 Door Latch Assembly.
Illustration 2.This is a view of the LH door striker assembly2. Remove the 6V-1155 Striker Assembly from the cab. Replace the 6V-1155 Striker Assembly with the 8T-3848 Striker Assembly.3. Remove the 8T-4156 Door Seal. Replace the 8T-4156 Door Seal with the 178-8894 Door Seal.After the installation of the new parts, adjust the door latch mechanism using the following procedure:1. Close the door and locate the striker.2. Make sure that the striker is centered vertically in the jaws of the 190-4173 Latch Assembly and that it does not cause the door to move up or down when the door is closing.3. Check for interference between the striker head and the jaws or latch case.4. If necessary, adjust the striker by adding or removing striker shims.5. Check for both secondary and primary latch positions. Primary
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts engine Caterpillar catalog:
3265239
ENGINE AR-PRIMARY
236B3, 252B3
236B3, 252B3
3491382
ENGINE AR
420E
420E
3611269
ENGINE AR-PRIMARY
D5K2 XL
D5K2 XL
3429318
ENGINE AR-PRIMARY
D3K2 LGP, D4K2 XL, D5K2 XL
D3K2 LGP, D4K2 XL, D5K2 XL
3507665
ENGINE AR
735B
735B
3377842
ENGINE AR-COMPLETE
793F CMD
793F CMD
3818006
ENGINE AR
793F CMD
793F CMD
3401705
ENGINE AR
420F, 428F, 430F, 432F
420F, 428F, 430F, 432F
4213014
ENGINE AR
797F
797F
3601647
ENGINE AR
797F
797F
3513790
ENGINE AR
797F
797F