ENGINE AR-COMPLETE 3431710 - Caterpillar

Illustration 1 g01404632
A view of the steering lines group looking to the back of the machine.The following new parts have been added to the 239-4010 Steering Lines Gp .
One new 4L-9337 Bolt (1)
Two new 8T-4121 Hard Washers (2)
One new 8M-2773 Clip (3)
One new 6V-8801 Nut (4)
One new 5P-7470 Clip (5)
One new 5P-7471 Clip (6)
One new 5P-7703 Grommet (7) The new parts are adaptable back to the beginning of production of the listed machines. The new parts became effective in production with the machines DFA331-UP and DFJ356-UP.Use the following procedures in order to update the earlier machines with the new parts.For the DFA machines and the DFJ machines, install the one new 8M-2773 Clip (3) around the 180-1486 Hose As (9) that is part of the 273-1809 Trailing Unit Control Gp .Install the one new 5P-7703 Grommet (7), the one new 5P-7470 Clip (5) and the one new 5P-7471 Clip (6) around the 249-4515 Hose As (8) that is part of the 239-4010 Steering Lines Gp .Install one new 8T-4121 Hard Washers (2) on the one new 4L-9337 Bolt (1). Insert the bolt through the clips. Install the second 8T-4121 Hard Washers (2) and the one new 6V-8801 Nut (4) on the bolt. Tighten the nut.For the remaining machines, install the 8M-2773 Clip (3) around the 180-1486 Hose As (9) that is part of the 155-3598 Trailing Unit Control Gp. Install the one new 5P-7703 Grommet (7), the one new 5P-7470 Clip (5) and the one new 5P-7471 Clip (6) around the 8X-7554 Hose As (10) that is part of the 155-3604 Steering Lines Gp .Install one new 8T-4121 Hard Washers (2) on the one new 4L-9337 Bolt (1). Insert the bolt through the clips. Install the second 8T-4121 Hard Washers (2) and the one new 6V-8801 Nut (4) on the bolt. Tighten the nut.