ENGINE AR 3485498 - Caterpillar

Install head assembly (23) onto hub assembly (15). Install bolts (22).
Illustration 12 g06338216
Install O-ring seal (21) and duo cone seal (20) as a unit into hub assembly (15).
Illustration 13 g06338281
Install bearing (19).
Illustration 14 g06337363
Install O-ring seal (18) into seal (17).
Illustration 15 g06338288
Install seal (17) into housing (4).
Illustration 16 g06338297Note: Coat both surfaces of the duo cone seal with a thin film of the fluid being sealed.
Place housing (4) onto hub assembly (15).
Illustration 17 g06338303
Install bearing (13).
Illustration 18 g06336921
Illustration 19 g06338309
Use Tooling (A) and a suitable press to install retaining ring (14).
Illustration 20 g06336915
Install thrust washers (12) and rings (11).
Illustration 21 g06338332
Install gear (9) and needle bearings (10). Repeat for the other gears and needle bearings.
Illustration 22 g06336908
Install thrust plate (8) and retaining rings (7).
Illustration 23 g06336862
Install planetary carrier assembly (6) and O-ring seal (3A) into housing (4).
Illustration 24 g06336851
Install ring (5) into cover (3).
Illustration 25 g06336836
Install cover (3) onto housing (4).
Illustration 26 g06336816
Install retaining ring (2).
Illustration 27 g06336806
Install plugs (1) and the O-ring seals.End By:
Install the final drive.