ENGINE AR-CORE 3531666 - Caterpillar

Adjust all mirrors as specified in the Operation and Maintenance Manual. Failure to heed this warning can lead to personal injury or death.
Slips and falls can result in personal injury. Use the machines access systems when adjusting the mirrors. If the mirrors cannot be reached using the machine access systems follow the instructions found within the Operation and Maintenance Manual, "Mirror" in order to access the mirrors.
Note: Your machine may not be equipped with all of the mirrors that are described in this topic.
Illustration 1 g01625702
(1) Left side rear view mirror (2) Left side front mirror
Illustration 2 g01626256
(3) Right side rear view mirror (4) Right side rear view mirrorMirrors provide additional visibility around your machine. Make sure that the mirrors are in proper working condition and that the mirrors are clean. Adjust all mirrors at the beginning of each work period and adjust the mirrors when you change operators. Appropriate job site organization is also recommended in order to minimize visibility hazards. For more information refer to this Operation and Maintenance Manual, "Visibility Information".Modified Machines or machines that have additional equipment or attachments may influence your visibility. Mirror Adjustment
Park the machine on a level surface.
Lower the work tool to the ground.
Move the hydraulic lockout control to the LOCKED position. For further details on this procedure, refer to Operation and Maintenance Manual, "Operator Controls"
Stop the engine.
Adjust rear view mirrors in order to provide visibility behind the machine at a maximum distance of 30 m (98 ft) from the rear corners of the machine.Note: You may need to use hand tools in order to adjust certain types of mirrors.Left Side Rear View Mirror (1)
Illustration 3 g01626266
If equipped, adjust the rear mirror (1) so that an area of at least 1 m (3.3 ft) from the rear of the machine can be seen from the operator seat. Additionally, provide as much visibility to the rear as possible.Left Side Front Mirror (2)
Illustration 4 g01625754
The left side front mirror (2) can be used to increase the visibility to the front right side of the machine.If equipped, adjust the left side front mirror (2) so that the front right area of the machine can be seen from the operator seat.Right Side Rear View Mirror (3)
Illustration 5 g01626725
If equipped, adjust the right side rear view mirror (3) so that the right side of the machine and the area behind the right side of the machine can be seen from the operator seat.Right Side Rear View Mirror (4)
Illustration 6 g01626728
If equipped, adjust the rear view mirror (4) so that the rear of the machine and the area behind the machine can be seen from the operator seat.