ENGINE AR-CORE 3535788 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06300733
Remove insulation (1) from the separator assembly.
Illustration 2 g06300736
Disconnect line assembly (2).
Illustration 3 g06300738
Disconnect line assembly (5) and loosen clamp (3), clamp (4), and clamp (6).
Illustration 4 g06300740
Remove bolt (9). Remove hose (7), and hose (8).
Illustration 5 g06300742
Remove nuts (10), cover (11), and the four spacers.
Illustration 6 g06300746
Remove bolts (12) and fumes disposal cover (13).
Illustration 7 g06300750
Remove separator assembly (14).
Repeat Steps 2 through 7 for the remaining separator assembliesInstallation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install separator assemblies (14) in the reverse order of removal.Note: Ensure that the foam damper pads are installed with the separator assemblies.