ENGINE AR-CORE 3592102 - Caterpillar

General Information.
Scope.
This publication provides the information necessary for the operation and maintenance of the TWIN DISC equipment specified on the cover of this manual. Specific engineering details and performance characteristics can be obtained from the Service Engineering Department of TWIN DISC INTERNATIONAL S.A. NIVELLES - BELGIUM or TWIN DISC INCORPORATED RACINE, WI. U.S.A. 53403.Operation and maintenance personnel responsible for this equipment should have this manual at their disposal and be familiar with its contents. Applying the information in the manual will result in consistent performance from the unit and help reduce downtime.Special Tools.
Engineering drawings are included for the fabrication of special tools that should be used during disassembly and assembly of a unit. Repair of this equipment should not be attempted without special tools. TWIN DISC does not manufacture these tools for general use.Replacement Parts.
Parts Lists.
Illustrations with complete parts listings are provided in appropriate sections of the manual to facilitate ordering spare or replacement parts.
All replacement parts or products (including hoses and fittings) must be of Twin Disc origin or equal, and otherwise identical with components of the original equipment. Use of any other parts or products will void the warranty and may result in malfunction or accident, causing injury to personnel and/or serious damage to the equipment.
Ordering Parts.
Renewal Parts and Service Parts Kits may be obtained from any authorized TWIN DISC distributor or service dealer. Do NOT use planographs included in this manual for ordering parts. Parts must be ordered from the bill of material. Bill of material numbers are stamped on the unit's name-plate.If the bill of material sheet from which part numbers are obtained is unavailable, proceed as follows :1. Provide the figure number of the illustration containing the part, the item number of the part, the description of the part, and the quantity required.2. Do not use the word 'complete', but state exactly each item wanted.3. Do not designate the quantity by 'sets', but specify the number of parts required.4. Specify the model, bill of material, and serial number of the unit involved. These numbers are stamped on the unit's nameplate.Parts Shipment.
Furnish the complete shipping destination and postal address. All parts shipments made from the factory will be F.O.B. TWIN DISC INTERNATIONAL S.A. NIVELLES - BELGIUM or TWIN DISC INCORPORATED, RACINE, WI. U.S.A. 53403.If shipping instructions are not specified on the order, the equipment will be shipped the best way, considering time and expense. Twin Disc will not be responsible for any charges incurred by this procedure.Twin Disc, having stipulated the bill of material of the unit's nameplate, absolves itself of any responsibility resulting from any external, internal, or installation changes made in the field without the express written approval of Twin Disc. All returned parts, new or old, emanating from any of the above stated changes will not be accepted for credit. Furthermore, any equipment which has been subjected to such changes will not be covered by a Twin Disc warranty.Preventive Maintenance - Trouble Shooting.
Frequent reference to the information provided in this manual