3599210 ENGINE AR-COMPLETE Caterpillar parts
C13
Rating:
Alternative (cross code) number:
CA3599210
359-9210
3599210
CA3599210
359-9210
3599210
TRUCK ENGINE,
Compatible equipment models: 3599210:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Illustration 1 g01132963
Disconnect hose assemblies (1) and (6).
Disconnect harness assemblies (3) and (5) (not shown).
Remove oil level gauge tube (2).
Remove the bracket assembly and fuel filter base (4).
Illustration 2 g01132968
Remove bolts (7).
Disconnect harness assembly (8).
Illustration 3 g01132970
Disconnect hose assemblies (11), (12), (13), and (16).
Disconnect tube assembly (15).
Remove the cover for water regulator housing (14).
Attach a suitable lifting device to cylinder head (10). The weight of cylinder head (10) is approximately 227 kg (500 lb). Remove bolts (9).
Remove cylinder head (10).
Start By:
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Illustration 1 g01132963
Disconnect hose assemblies (1) and (6).
Disconnect harness assemblies (3) and (5) (not shown).
Remove oil level gauge tube (2).
Remove the bracket assembly and fuel filter base (4).
Illustration 2 g01132968
Remove bolts (7).
Disconnect harness assembly (8).
Illustration 3 g01132970
Disconnect hose assemblies (11), (12), (13), and (16).
Disconnect tube assembly (15).
Remove the cover for water regulator housing (14).
Attach a suitable lifting device to cylinder head (10). The weight of cylinder head (10) is approximately 227 kg (500 lb). Remove bolts (9).
Remove cylinder head (10).