ENGINE AR-CORE 3605973 - Caterpillar

Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Do Not Weld on ROPS (9)
Illustration 11 g01961957
TIf equipped, this safety message is located on the rear of the cab.
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information. Pressurized System (10)
Illustration 12 g01371640
This safety message is located on the radiator.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information. High Pressure Cylinder (11)
Illustration 13 g01371642
This safety message is located on the track adjuster.
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Refer to Operation and Maintenance Manual , "Track Adjustment - Adjust" for the proper service procedure. Crushing Hazard (12)
Illustration 14 g01374060
This safety message is located on both sides of the rear of the machine.
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
High Pressure Gas (13)
Illustration 15 g01067549
This safety message is located on the accumulator.
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual , "Engine Starting with Jump Start Cables" for the proper service procedure.Hot Fluid under Pressure (14)
Illustration 16 g01378799
This safety message is located on the top of the hydraulic tank.
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.