ENGINE AR-COMPLETE 3654046 - Caterpillar

3654046 ENGINE AR-COMPLETE Caterpillar parts 966K

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3654046
365-4046
3654046

Weight: 2292 pounds 1039 kg.

Buy ENGINE AR-COMPLETE 3654046 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Related part:

3654046 SHORT BLOCK 20R2861 R

3654046 LONG BLOCK 20R5307 R

3654046 ENGINE AR-COMPL 20R7003 R

Compatible equipment models: 3654046:

WHEEL LOADER 966K Caterpillar

For full view, you need register

Information:

PARTS NEEDED
Qty
Part Number Description
1 0R8502 CRANKSHAFT AS
1 1880478 COUNTERWEIGHT
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 23% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
During a repair or Planned Component Rebuild inspect the rear counterweight mounting surfaces on the crankshaft.
Refer to the Reuse And Salvage Guideline, SEBF8156 to determine if the fretting depth still allows for the appropriate machine stock to true up the counterweight mounting surface.
If the fretting depth is within the acceptable machining dimension specified in the reuse and salvage guidelines refer to Service Claim Allowances table for support.
If the fretting depth exceeds the acceptable amount specified in the reuse and salvage guidelines refer to the table in Image 1.1 in the Service Claim Allowances for support.
In either case, the correct part number and crank shaft serial number must be reported in order to process such claims.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-16000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
16001-32000 hrs,
49-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
32001-48000 hrs,
73-98 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 5.0-hour job
5.0 hours is allowed for machining.
The table above is for the allowance on the counterweight only.
If the fretting depth is within the acceptable machining dimension specified in the reuse and salvage guideline, refer to Service Claim Allowance table above for support.
The correct part number and crankshaft serial number must be reported in order to process such claims.
Image1.1
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.