ENGINE AR-COMPLETE 3755840 - Caterpillar

3755840 ENGINE AR-COMPLETE Caterpillar parts 988H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3755840
375-5840
3755840

Buy ENGINE AR-COMPLETE 3755840 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Related part:

3755840 SHORT BLOCK 10R9366 R

3755840 LONG BLOCK 10R9369 R

3755840 ENGINE AR-COMPL 20R2510 R

Compatible equipment models: 3755840:

WHEEL LOADER 988H Caterpillar

For full view, you need register

Information:

Installation Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: The cab and the heater assembly are removed for photographic purposes.
Illustration 1 g00501674
Use a suitable lifting device and lower the main control valve into the machine. The weight of the main control valve is approximately 27 kg (60 lb).
Illustration 2 g00501671
Lift the main control valve. Attach the hoses.
Install bolts (14). Tighten bolts (14) to a torque of 28 7 N m (21 5 lb ft).
Connect linkages (13), (12), (11), (10), and (9) .
Illustration 3 g00501618
Illustration 4 g00501619
Connect the remaining hoses.
Illustration 5 g00501621
Install the horn and bolt (7).
Illustration 6 g00501610
Install the plate assembly (6) .
Connect the linkage and nut (5) .
Illustration 7 g00501603
Install the pedal and install the bolt on the pedal. Install the linkage and install the nut (4) .
Illustration 8 g00501581
Connect the pedal and the linkage and install the bolt (3) .
Illustration 9 g00501565
Connect the harness assembly on plate assembly (2). Install plate assembly (2) .
Install bolts (1) and the washers.