ENGINE AR-COMPLETE 3781510 - Caterpillar

Install adapter (47), adapter (57), drain valve (58), and two nylon inserts (59) on the manifold (52) on the right side.Install eight nylon inserts (59), two check valves (61), and two plugs (60) on manifolds (52) on the left side.
Illustration 31 g06310225
(59) 241-8553 Nylon Insert
(62A) 5P-1505 Hose ( 190 mm (7.5 inch))
(62B) 5P-1505 Hose ( 200 mm (7.9 inch))
(62C) 5P-1505 Hose ( 720 mm (28.3 inch))
(62D) 5P-1505 Hose ( 750 mm (29.5 inch))
(63) 312-0288 Clamp
Install hose (62A), hose (62B), hose (62C), and hose (62D) across the manifolds by fixing to nylon inserts (59) on the manifolds. Secure the hoses to the nylon inserts (59) using clamps (63).
Illustration 32 g06310213
(47) 331-9060 Adapter
(49) 205-7299 Clip
(50B) 5P-1442 Hose ( 530 mm (20.9 inch))
Connect the hose (50B) to the adapter (47) and secure the hose using the clip (49).
Illustration 33 g06310257
(33) 204-2281 Cable Strap
(50B) 5P-1442 Hose ( 530 mm (20.9 inch))
(51) 5P-4961 Hose Clamp
(62E) 5P-1505 Hose ( 160 mm (6.3 inch))
(62F) 5P-1505 Hose ( 300 mm (11.8 inch))
(63) 312-0288 Clamp
Connect the other end of hose (50B) to nylon insert on top of the manifold on the right side. Secure the hose to the nylon insert using a hose clamp (51) and secure the hose to the existing link on the frame using a cable strap (33).Connect the hose (62E) and hose (62F) from nylon inserts on manifolds on the left side, to the nylon inserts on the diaphragm spray pumps, as shown in Illustration 33. Use two clamps (63) on the manifold side to secure the hoses. Use the existing clamps on the pump side to secure the hoses.
Illustration 34 g06310275
(62C) 5P-1505 Hose ( 720 mm (28.3 inch))
(62D) 5P-1505 Hose ( 750 mm (29.5 inch))
Connect the free end of the hose (62C) and hose (62D) to the nylon inserts on the manifold (Spray Group) as shown in Illustration 34.
Illustration 35 g06310382
(1) 433-3460 Sidecutter Gp
(64) 230-9095 Film
Affix the film (64) on the sidecutter group (1) as shown in Illustration 35.Installation Procedure for 530-3109 Sidecutter Ar
Perform Step 1 to Step 24 from Section "Installation Procedure for 430-3372 Sidecutter Ar".
Illustration 36 g06311462
(14) 8T-4189 Bolt
(65) 530-3107 Bracket
(66) 3E-4352 Hard WasherInstall the bracket (65) on to the frame support using two bolts (13) and two hard washers (66).
Illustration 37 g06311482
(46) 288-1436 Solenoid Valve As
(47) 331-9060 Adapter
(65) 530-3107 Bracket
(67) 8L-8413 Cable StrapInstall the solenoid valve (46) by mounting on the bracket (65). Secure the solenoid valve (46) to the bracket (65) using four cable straps (67) at four places (Including the receptacle of the solenoid valve) as shown in Illustration 37. Connect the receptacle of the solenoid valve (46) to the machine main harness.Perform Step 26 to Step 34 from Section "Installation Procedure for 430-3372 Sidecutter Ar".