ENGINE AR-COMPLETE 3856956 - Caterpillar

Illustration 1 g01950618
(1) LOWER position
(2) FLOAT position
(3) HOLD position
(4) RAISE position The hoist control is located to the right of the operator's seat. The hoist control has four positions: RAISE, HOLD, FLOAT and LOWER. The machine should normally be operated with the hoist control in the FLOAT position.The hoist control is connected to the hoist control position sensor. The hoist control position sensor sends electrical signals to the Chassis Electronic Control Module. See the hydraulic system System Operation, "Position Sensor (Hoist Control)" for additional information.When the hoist control is released a spring will move the hoist control from the RAISE position to the HOLD position or from the LOWER position to the FLOAT position.