ENGINE AR-CORE 3863017 - Caterpillar

For the right detonation sensor, measure the resistance between the points that are listed in Table 3. During each measurement, wiggle the wires in the harness in order to check for an intermittent problem. Be sure to wiggle the wires near each of the connectors.
Table 3
Resistance Measurements for the Harness for the Right Detonation Sensor    
Terminals on the EIS Connector    
EISC-E (Right Detonation Sensor Signal)     EISC-A (+Battery)    
EISC-B (−Battery)
EISC-H (Left