3899983 ENGINE AR-COMPLETE Caterpillar parts
C32
Rating:
Alternative (cross code) number:
CA3899983
389-9983
3899983
CA3899983
389-9983
3899983
Weight: 6888 pounds 3124 kg.
INDUSTRIAL ENGINE,
Related part:
3899983
SHORT BLOCK
20R0195
R
3899983
LONG BLOCK M
20R1371
R
3899983
ENGINE AR-COMPL
20R6755
R
Compatible equipment models: 3899983:
For full view, you need register
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
On a Excavator, the antenna for the Product Link system is mounted on a bracket that places the antenna in a horizontal position. Refer to Illustration 1.
Illustration 1 g01633591
This position is chosen in order to protect the antenna from damage during transportation. This horizontal position is not an operational position. The antenna must be placed in the vertical position in order to operate correctly.Solution
Before registering and operating Product Link, ensure that the antenna is in the vertical position. The bracket has two positions in order to place the antenna. If the antenna is delivered in a horizontal position, reseat the antenna in the vertical position by performing the following steps:
Unscrew the nut for the antenna.
Remove the antenna from the horizontal position. Use care when you handle the harness. Ensure that the harness and the antenna are not damaged.
Place the antenna in the vertical position by mounting the antenna on top of the bracket.
Tighten the nut in order to secure the antenna.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
On a Excavator, the antenna for the Product Link system is mounted on a bracket that places the antenna in a horizontal position. Refer to Illustration 1.
Illustration 1 g01633591
This position is chosen in order to protect the antenna from damage during transportation. This horizontal position is not an operational position. The antenna must be placed in the vertical position in order to operate correctly.Solution
Before registering and operating Product Link, ensure that the antenna is in the vertical position. The bracket has two positions in order to place the antenna. If the antenna is delivered in a horizontal position, reseat the antenna in the vertical position by performing the following steps:
Unscrew the nut for the antenna.
Remove the antenna from the horizontal position. Use care when you handle the harness. Ensure that the harness and the antenna are not damaged.
Place the antenna in the vertical position by mounting the antenna on top of the bracket.
Tighten the nut in order to secure the antenna.