AVSPARE.COM
parts catalog

ENGINE AR-PRIMARY 3905141 - Caterpillar



3905141 ENGINE AR-PRIMARY Caterpillar parts C3.4 ENGINE
Rating:
21
Alternative (cross code) number:
CA3905141
390-5141
3905141
Caterpillar 3905141 ENGINE AR-PRIMARY

Buy ENGINE AR-PRIMARY 3905141 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

You can buy parts: .

$1,064.94

31 Jan 2021
All States Ag Parts Parts A.S.A.P. Engine Rebuild Kit - Less Bearings Compatible with Caterpillar 908H 256C 277C 289C 262C 279C 287C 3044CT C3.4
Fits Caterpillar Skid Steer Loader(s) 256C, 262C, 277C, 279C, 287C, 289C || Fits Caterpillar Construction & Industrial(s) 908H || Fits Caterpillar Engine(s) C3.4 (Turbo, Direct Injection; s/n CJS1-later, CYM1-later), 3044CT (Turbo, Direct Injection; s/n CJS1-later, CYM1-later) || C3.4 Engine Arrangement: 294-4464, 294-4465, 294-4467, 294-4468, 294-4469, 311-1332, 321-7700, 350-6970, 388-1871, 388-1874, 390-5141, 390-5147, 392-5661, 431-1752 || 3044CT Engine Arrangement: 287-8074, 305-2572, 319-6806, 389-9244
$941.95

16 Jul 2018
2500 Hundredths Pounds
All States Ag Parts Engine Rebuild Kit - Less Bearings - .020" Oversize Pistons Caterpillar 289C 277C 3044CT C3.4 262C 279C 287C 908H 256C
Fits Caterpillar Skid Steer Loader(s) 256C, 262C, 277C, 279C, 287C, 289C || Fits Caterpillar Construction & Industrial(s) 908H || Fits Caterpillar Engine(s) C3.4 (Turbo, Direct Injection; s/n CJS1-later, CYM1-later), 3044CT (Turbo, Direct Injection; s/n CJS1-later, CYM1-later) || C3.4 Engine Arrangement: 294-4464, 294-4465, 294-4467, 294-4468, 294-4469, 311-1332, 321-7700, 350-6970, 388-1871, 388-1874, 390-5141, 390-5147, 392-5661, 431-1752 || 3044CT Engine Arrangement: 287-8074, 305-2572, 319-6806, 389-9244
  For full view, you need register

Compatible equipment models: 3905141:

INDUSTRIAL ENGINE  C3.4   Caterpillar

Information:


Illustration 1 g00819040
Type of fuel injection pump ... In-line cassetteDirection of rotation of the camshaft for the fuel injection pump ... Clockwise from the drive end (1) Tighten the union nut that connects the low pressure fuel line to the fuel injection pump to the following torque. ... 2.5 N m (22 lb in) (2) Tighten the mounting nuts to the following torque. ... 15 N m (11 lb ft) (3) Tighten the four delivery valve holders to the following torque. ... 42 N m (31 lb ft) (4) Shim (5) Tighten the mounting bolts to the following torque. ... 15 N m (11 lb ft)The shim adjusts the timing of the fuel injection pump. A thicker shim retards the timing. A thinner shim advances the timing. The timing changes one degree for each 0.10 mm (0.004 inch) difference in the thickness of the shim. More than one shim can be used. If the fuel injection pump is reinstalled, a new shim, which is the same thickness as the original shim, must be installed.If any of the following new components are installed, a new shim which has a thickness of 0.5 mm (0.020 inch) must be used in order to correctly adjust the timing of fuel injection.
Camshaft
Cylinder blockThe following thicknesses of shims are available:
0.10 mm (0.004 inch)
0.20 mm (0.008 inch)
0.30 mm (0.012 inch)
0.40 mm (0.016 inch)
0.50 mm (0.020 inch)

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.