parts catalog

ENGINE AR-PRIMARY 3905143 - Caterpillar

3905143 ENGINE AR-PRIMARY Caterpillar parts C4.4 ENGINE
Alternative (cross code) number:
Caterpillar 3905143 ENGINE AR-PRIMARY

Buy ENGINE AR-PRIMARY 3905143 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3905143:

INDUSTRIAL ENGINE  C4.4   Caterpillar
  For full view, you need register


Correction Factor
To find the correction factor, look at the SIMS and owner's records, and the machine's record. Make an estimate of the average hours per month, and, then, talk to the owner or operator to find information, like down time, for the time since the last report or record. Adjust the estimate according to this information.
If a new Service Meter is installed, the correction factor will be the number of hours the machine was in operation before the new Service Meter is installed. To find this, make an estimate, through use of the above information, of the hours the machine has been in operation since the Service Meter failure and add these hours to the hours shown on the bad meter. This is the conversion factor. Write it in the shiny area on the decal.
If repairs have been made to the electrical circuit for the Service Meter, use the information to estimate the number of hours the machine was in operation during the time the Service Meter did not work. This is the conversion factor. Write it in the shiny area on the decal.
Service Meter Correction Decal, Form No. SEHS7785 installed on Service Meter.Installation Of Decal
Clean the face of the meter. Remove the center part of the decal. Remove the back paper and install the decal on the face of the meter.
Use Of Service Meter Correction Decal
To find the number of hours a machine has operated, add the conversion factor to the meter indication.
Important: Write A Sims Report After Installation Of Service Meter Correction Decal
It is important to write a SIMS report after installation of a Service Meter correction decal. In the "HOURS" space, write the total number of hours on the machine, including the conversion factor.
Under "PART NUMBER CAUSING PROBLEM," write the part number of the Service Meter which had a failure. Under "GROUP NUMBER CONTAINING PART," write the Gauge And Warning Group Number for the machine.
UNDER "OPTIONAL COMMENTS," write "HR CORR" and the conversion factor.
Write the remainder of the report as normally done.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.