ENGINE AR-COMPLETE 3932807 - Caterpillar

Illustration 1 g01520019The engine lockout control allows the engine to be disabled while service is performed. Use the engine lockout control to prevent accidental activation of the following:
The engine starter
The secondary steering
Illustration 2 g02320884
Park the machine on a level surface and stop the engine. Make sure that the transmission control is in the P position.
Chock the wheels on the machine.
Open door (3) in order to access the engine lockout switch.
Move switch (2) upward in order to activate the engine lockout mode. When the switch is activated, one of the following results will occur:
Illustration 3 g03116981
Indicator light (4) is located inside the cab on the gauge cluster.
Indicator lights (1) and (4) will illuminate continuously. This will indicate that the machine is in the engine lockout mode.
The indicator lights will flash in order to indicate that the engine lockout mode is not fully active. If the indicator lights are flashing, confirm that the transmission control is in the P position and confirm that the engine start switch is in the OFF position. If the indicator lights continue to flash, consult your Caterpillar dealer.Note: The indicator light on the dash panel will correspond with the status of the machine lockout control and the status of the engine lockout control. The indicator light on the dash panel does not differentiate the status of the machine lockout control from the status of the engine lockout control.
Move the engine lockout switch downward in order to deactivate the engine lockout mode.