ENGINE AR-COMPLETE 4248405 - Caterpillar

Illustration 1 g03285077
Table 1
Specification for 393-7998 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use black 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 2 357-5710 Bushing(1) Bore before assembly is 80.12 0.02 mm (3.154 0.001 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
2 2 229-1095 Bushing(1) Bore before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
3 2 229-1091 Bushing(1) Bore before assembly is 65.19 0.04 mm (2.567 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
4 1 127-3913 Pin As Diameter is 59.86 0.03 mm (2.357 0.001 inch).
5 1 1R-6225 Pin As Diameter is 59.86 0.03 mm (2.357 0.001 inch).
6 2 166-1494 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 166-1492 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 2 248-7836 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
(1) Install the bushing in the bore so that the part number of bushing is facing outward.