ENGINE AR-COMPLETE 4304547 - Caterpillar

Timing Gear Cover
Start By:a. remove water pumpb. remove automatic timing advancec. remove crankshaft front seald. remove sea water pump (Marine Engine)e. remove oil pan1. Remove the engine front support. 2. Remove the bolts that hold timing gear cover (1) to the engine block. Remove the studs from around the cover with Tool (A) to permit the timing gear cover to clear elbow (2).3. Remove cover (2).Install Timing Gear Cover
1. Put clean engine oil on the O-ring seal for fuel injection pump housing (1).2. Put a new gasket (2) and the timing gear cover (5) into position on the front of the cylinder block.3. Install bolts (4) that hold the timing gear cover to the cylinder block. Put 9S2365 Retaining Compound on studs (3) and install with Tool (A).4. Cut the timing cover gasket even with the bottom of the cylinder block.5. Install the engine from supports.End By:a. install water pumpb. install automatic timing advancec. install crankshaft front seald. install sea water pump (Marine Engine)e. install oil pan