ENGINE AR-COMPLETE 4311459 - Caterpillar

4311459 ENGINE AR-COMPLETE Caterpillar parts 336E, 336E L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4311459
431-1459
4311459

Weight: 2380 pounds 1079 kg.

Buy ENGINE AR-COMPLETE 4311459 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, MOBILE HYD POWER UNIT,

Related part:

4311459 SHORT BLOCK 20R2861 R

4311459 LONG BLOCK 20R5307 R

4311459 ENGINE AR-COMPL 20R7002 R

Compatible equipment models: 4311459:

EXCAVATOR 336E L

MOBILE HYD POWER UNIT 336E Caterpillar

For full view, you need register

Information:

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00726703
Fasten a hoist to lift cylinder (6), as shown. Put the lift cylinder into position in the support assembly with the two spacers and install pin (7) .
Install retainer (8) and the bolt that holds pin (7) in place.
Illustration 2 g00726700
Connect hose assemblies (1) and (3) to the lift cylinder.
Install clips (2) and the bolt in order to hold hose assembly (3) in position on the lift cylinder.
Start the machine and move the lift cylinder until the rod assembly makes contact with the trunnion ball on the bulldozer blade.
Illustration 3 g00726701
Note: Install an equal amount of shims on each side of the cap in order to obtain a 0.3 mm (.010 inch) to 0.8 mm (.030 inch) clearance between the cap and the trunnion ball.
Put cap (5) and the shims into position on the rod assembly. Install four bolts (4) and the nuts.
Fill the implement hydraulic system. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.