AVSPARE.COM
parts catalog

ENGINE AR-PRIMARY 4415487 - Caterpillar



4415487 ENGINE AR-PRIMARY Caterpillar parts C4.4 ENGINE
Rating:
69
Alternative (cross code) number:
CA4415487
441-5487
4415487
Caterpillar 4415487 ENGINE AR-PRIMARY

Buy ENGINE AR-PRIMARY 4415487 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 4415487:

INDUSTRIAL ENGINE  C4.4   Caterpillar
  For full view, you need register

Information:

1. Remove bolts (1), the lock and thrust plate that hold the camshaft in place.2. Carefully pull camshaft (2) out of the cylinder block.3. Remove the bolts that hold the camshaft gear to the camshaft and remove the gear.Install Camshaft
1. Put the camshaft drive gear in position on the end of the shaft. Install the bolts that hold the drive gear in place. The drive gear will fit on the camshaft only one way. 2. Turn the fuel injection pump drive gear until timing pin (A) can be installed in the groove (slot) in the fuel injection pump camshaft as shown. The fuel injection pump now is in correct time.3. Put clean engine oil on the bearing journals of the camshaft. Put 2P2506 Thread Lubricant on the camshaft lobes.4. Install the crankshaft pulley bolt with extra washers in the crankshaft and turn the crankshaft so the "C" mark on the crankshaft will be in alignment with the "C" mark on the camshaft gear when the camshaft is instaled. The number 1 piston is now at top center compression position.
Typical Example5. Carefully install camshaft (1) in the cylinder block with the "C" mark on the camshaft gear in alignment with the "C" mark on the crankshaft gear. It can be necessary to turn the crankshaft a very small amount to install the camshaft. 6. Be sure "C" marks (2) on the crankshaft gear and camshaft gear are in alignment. Install the thrust plate, lock and bolts (3) that hold the camshaft in place.7. Check the fuel injection timing. See TESTING AND ADJUSTING.END BY:a) install timing gear coverb) install valve lifters

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts engine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.