ENGINE AR-COMPLETE 4447557 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A − Loctite Sealant − Gasket 1 Start By:
Remove the fumes disposal group.
Remove the wastegate solenoid.
Illustration 1 g02150327
Remove nut (1). Remove cable straps (2) Disconnect harness assemblies (3). Remove clamp (4).
Illustration 2 g02150381
Remove bolts (5) and remove inlet manifold (6).
Illustration 3 g02150389
Remove clamp (7). Remove bolts (8) and bolts (9). Separate inlet manifold (6) from elbow (11). Separate tube assembly (10) from elbow (11).
Illustration 4 g02150420
Remove O-ring seal (12), wave ring (13), and tube (14). Installation Procedure
Install inlet manifold (6) in the reverse order of removal.
Apply Tooling (A) uniformly to the face of inlet manifold (6) and assemble within 10 minutes of application.